3898 lines
107 KiB
Plaintext
3898 lines
107 KiB
Plaintext
|
--
|
||
|
-- Copyright (C) 2010 The FreeBSD Foundation
|
||
|
--
|
||
|
-- This documentation was written by Shteryana Sotirova Shopova under
|
||
|
-- sponsorship from the FreeBSD Foundation.
|
||
|
--
|
||
|
-- Redistribution and use in source and binary forms, with or without
|
||
|
-- modification, are permitted provided that the following conditions
|
||
|
-- are met:
|
||
|
-- 1. Redistributions of source code must retain the above copyright
|
||
|
-- notice, this list of conditions and the following disclaimer.
|
||
|
-- 2. Redistributions in binary form must reproduce the above copyright
|
||
|
-- notice, this list of conditions and the following disclaimer in the
|
||
|
-- documentation and/or other materials provided with the distribution.
|
||
|
--
|
||
|
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||
|
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
|
||
|
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||
|
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
|
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||
|
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||
|
-- SUCH DAMAGE.
|
||
|
--
|
||
|
-- $FreeBSD$
|
||
|
--
|
||
|
|
||
|
BEGEMOT-WIRELESS-MIB DEFINITIONS ::= BEGIN
|
||
|
|
||
|
IMPORTS
|
||
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
||
|
Counter32, Integer32, TimeTicks, Unsigned32, mib-2
|
||
|
FROM SNMPv2-SMI
|
||
|
TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus,
|
||
|
DisplayString
|
||
|
FROM SNMPv2-TC
|
||
|
InterfaceIndex, ifIndex FROM IF-MIB
|
||
|
begemot
|
||
|
FROM BEGEMOT-MIB;
|
||
|
|
||
|
begemotWlan MODULE-IDENTITY
|
||
|
LAST-UPDATED "201005170000Z"
|
||
|
ORGANIZATION "The FreeBSD Foundation"
|
||
|
CONTACT-INFO
|
||
|
" Shteryana Shopova
|
||
|
|
||
|
Postal: 12 Andrey Lyapchev Blvd.
|
||
|
block 2, ap.19
|
||
|
1797 Sofia
|
||
|
Bulgaria
|
||
|
|
||
|
Fax: N/A
|
||
|
|
||
|
E-Mail: syrinx@FreeBSD.org"
|
||
|
DESCRIPTION
|
||
|
"The Begemot MIB for managing IEEE802.11 interfaces."
|
||
|
REVISION "201005170000Z"
|
||
|
DESCRIPTION
|
||
|
"Initial revision."
|
||
|
::= { begemot 210 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- Textual conventions
|
||
|
-- ---------------------------------------------------------- --
|
||
|
WlanMgmtReasonCode ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enumeration of reason and codes used in IEEE802.11
|
||
|
management frames to indicate why an action took place."
|
||
|
SYNTAX INTEGER {
|
||
|
unspecified(1),
|
||
|
authenticationExpire(2),
|
||
|
authenticationLeave(3),
|
||
|
associationExpire(4),
|
||
|
associationTooMany(5),
|
||
|
notAuthenticated(6),
|
||
|
notAssociated(7),
|
||
|
associationLeave(8),
|
||
|
associationNotAuthenticated(9),
|
||
|
-- XXX: TODO - FIXME
|
||
|
dissassocPwrcapBad(10),
|
||
|
dissassocSuperchanBad(11),
|
||
|
ieInvalid(13),
|
||
|
micFailure(14),
|
||
|
fourWayHandshakeTimeout(15),
|
||
|
groupKeyUpdateTimeout(16),
|
||
|
ieIn4FourWayDiffers(17),
|
||
|
groupCipherInvalid(18),
|
||
|
pairwiseCiherInvalid(19),
|
||
|
akmpInvalid(20),
|
||
|
unsupportedRsnIeVersion(21),
|
||
|
invalidRsnIeCap(22),
|
||
|
dot1xAuthFailed(23),
|
||
|
cipherSuiteRejected(24),
|
||
|
unspeciffiedQos(32),
|
||
|
insufficientBw(33),
|
||
|
tooManyFrames(34),
|
||
|
outsideTxOp(35),
|
||
|
leavingQbss(36),
|
||
|
badMechanism(37),
|
||
|
setupNeeded(38),
|
||
|
timeout(39)
|
||
|
}
|
||
|
|
||
|
WlanMgmtMeshReasonCode ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enumeration of reason and codes used in IEEE802.11
|
||
|
mesh routing management frames to indicate why an
|
||
|
action took place."
|
||
|
SYNTAX INTEGER {
|
||
|
-- XXX: TODO - FIXME
|
||
|
peerLinkCancelled(2),
|
||
|
maxPeers(3),
|
||
|
cpViolation(4),
|
||
|
closeRcvd(5),
|
||
|
maxRetries(6),
|
||
|
confirmTimeout(7),
|
||
|
invalidGtk(8),
|
||
|
inconsistentParams(9),
|
||
|
invalidSecurity(10),
|
||
|
perrUnspecified(11),
|
||
|
perrNoFI(12),
|
||
|
perrDestUnreach(13)
|
||
|
}
|
||
|
|
||
|
WlanMgmtStatusCode ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enumeration of reason and codes used in IEEE802.11
|
||
|
management frames to indicate what the result of an
|
||
|
operation is."
|
||
|
SYNTAX INTEGER {
|
||
|
-- XXX: TODO - FIXME
|
||
|
success(0),
|
||
|
unspecified(1),
|
||
|
capabilitiesInfo(10),
|
||
|
notAssociated(11),
|
||
|
other(12),
|
||
|
algorithm(13),
|
||
|
sequence(14),
|
||
|
challenge(15),
|
||
|
timeout(16),
|
||
|
tooMany(17),
|
||
|
basicRate(18),
|
||
|
spRequired(19),
|
||
|
pbccRequired(20),
|
||
|
caRequired(21),
|
||
|
specMgmtRequired(22),
|
||
|
pwrcapRequire(23),
|
||
|
superchanRequired(24),
|
||
|
shortSlotRequired(25),
|
||
|
dssofdmRequired(26),
|
||
|
missingHTCaps(27),
|
||
|
invalidIE(40),
|
||
|
groupCipherInvalid(41),
|
||
|
pairwiseCipherInvalid(42),
|
||
|
akmpInvalid(43),
|
||
|
unsupportedRsnIEVersion(44),
|
||
|
invalidRsnIECap(45),
|
||
|
cipherSuiteRejected(46)
|
||
|
}
|
||
|
|
||
|
WlanRegDomainCode ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enumeration of regdomain codes."
|
||
|
SYNTAX INTEGER {
|
||
|
fcc(1),
|
||
|
ca(2),
|
||
|
etsi(3),
|
||
|
etsi2(4),
|
||
|
etsi3(5),
|
||
|
fcc3(6),
|
||
|
japan(7),
|
||
|
korea(8),
|
||
|
apac(9),
|
||
|
apac2(10),
|
||
|
apac3(11),
|
||
|
row(12),
|
||
|
none(13),
|
||
|
debug(14),
|
||
|
sr9(15),
|
||
|
xr9(16),
|
||
|
gz901(17)
|
||
|
}
|
||
|
|
||
|
WlanIfaceDot11nPduType ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enumeration of values for PDU transmit/receive enabled."
|
||
|
SYNTAX INTEGER {
|
||
|
disabled(0),
|
||
|
rxOnly(1),
|
||
|
txOnly(2),
|
||
|
txAndRx(3)
|
||
|
}
|
||
|
|
||
|
WlanPeerCapabilityFlags ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A list of capability bits that may be advertised by a peer."
|
||
|
SYNTAX BITS {
|
||
|
ess(1),
|
||
|
ibss(2),
|
||
|
cfPollable(3),
|
||
|
cfPollRequest(4),
|
||
|
privacy(5),
|
||
|
shortPreamble(6),
|
||
|
pbcc(7),
|
||
|
channelAgility(8),
|
||
|
shortSlotTime(9),
|
||
|
rsn(10),
|
||
|
dsssofdm(11)
|
||
|
}
|
||
|
|
||
|
WlanIfPhyMode ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A list of wireless PHY operating modes."
|
||
|
SYNTAX INTEGER {
|
||
|
auto(1),
|
||
|
dot11a(2),
|
||
|
dot11b(3),
|
||
|
dot11g(4),
|
||
|
fh(5),
|
||
|
turboA(6),
|
||
|
turboG(7),
|
||
|
sturboA(8),
|
||
|
dot11na(9),
|
||
|
dot11ng(10),
|
||
|
ofdmHalf(11),
|
||
|
ofdmQuarter(12)
|
||
|
}
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- Subtrees in the Begemot Wireless MIB
|
||
|
-- ---------------------------------------------------------- --
|
||
|
begemotWlanNotifications OBJECT IDENTIFIER ::= { begemotWlan 0 }
|
||
|
|
||
|
begemotWlanInterface OBJECT IDENTIFIER ::= { begemotWlan 1 }
|
||
|
|
||
|
begemotWlanScanning OBJECT IDENTIFIER ::= { begemotWlan 2 }
|
||
|
|
||
|
begemotWlanStatistics OBJECT IDENTIFIER ::= { begemotWlan 3 }
|
||
|
|
||
|
begemotWlanWep OBJECT IDENTIFIER ::= { begemotWlan 4 }
|
||
|
|
||
|
begemotWlanMACAccessControl OBJECT IDENTIFIER ::= { begemotWlan 5 }
|
||
|
|
||
|
begemotWlanMeshRouting OBJECT IDENTIFIER ::= { begemotWlan 6 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- begemotWlanMultimedia OBJECT IDENTIFIER ::= { begemotWlan 7 }
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- Cloned wireless interfaces' database
|
||
|
-- ---------------------------------------------------------- --
|
||
|
wlanInterfaceTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains the list of cloned wireless
|
||
|
interfaces created on the system."
|
||
|
::= { begemotWlanInterface 1 }
|
||
|
|
||
|
wlanInterfaceEntry OBJECT-TYPE
|
||
|
SYNTAX WlanInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Information for a cloned wireless interface."
|
||
|
INDEX { wlanIfaceName }
|
||
|
::= { wlanInterfaceTable 1 }
|
||
|
|
||
|
WlanInterfaceEntry ::= SEQUENCE {
|
||
|
wlanIfaceIndex InterfaceIndex,
|
||
|
wlanIfaceName DisplayString,
|
||
|
wlanParentIfName DisplayString,
|
||
|
wlanIfaceOperatingMode INTEGER,
|
||
|
wlanIfaceFlags BITS,
|
||
|
wlanIfaceBssid MacAddress,
|
||
|
wlanIfaceLocalAddress MacAddress,
|
||
|
wlanIfaceStatus RowStatus,
|
||
|
wlanIfaceState INTEGER
|
||
|
}
|
||
|
|
||
|
wlanIfaceIndex OBJECT-TYPE
|
||
|
SYNTAX InterfaceIndex
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The ifIndex of this cloned wireless interface."
|
||
|
::= { wlanInterfaceEntry 1 }
|
||
|
|
||
|
wlanIfaceName OBJECT-TYPE
|
||
|
SYNTAX DisplayString (SIZE(1..32))
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The name of this cloned wireless interface."
|
||
|
::= { wlanInterfaceEntry 2 }
|
||
|
|
||
|
wlanParentIfName OBJECT-TYPE
|
||
|
SYNTAX DisplayString (SIZE(1..32))
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The name of this cloned wireless interface's parent hardware
|
||
|
interface."
|
||
|
::= { wlanInterfaceEntry 3 }
|
||
|
|
||
|
wlanIfaceOperatingMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
ibss(0),
|
||
|
station(1),
|
||
|
wds(2),
|
||
|
adhocDemo(3),
|
||
|
hostAp(4),
|
||
|
monitor(5),
|
||
|
meshPoint(6),
|
||
|
tdma(7)
|
||
|
}
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The desired operating mode of the cloned wireless interface."
|
||
|
DEFVAL { station }
|
||
|
::= { wlanInterfaceEntry 4 }
|
||
|
|
||
|
wlanIfaceFlags OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
uniqueBssid(1),
|
||
|
noBeacons(2),
|
||
|
wdsLegacy(3)
|
||
|
}
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Flags per cloned wireless interface used during creation."
|
||
|
::= { wlanInterfaceEntry 5 }
|
||
|
|
||
|
wlanIfaceBssid OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The BSSID assigned to a cloned wireless interface operating in
|
||
|
WDS mode."
|
||
|
::= { wlanInterfaceEntry 6 }
|
||
|
|
||
|
wlanIfaceLocalAddress OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The unique local MAC address assigned to the cloned wireless
|
||
|
interface during creation."
|
||
|
::= { wlanInterfaceEntry 7 }
|
||
|
|
||
|
wlanIfaceStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This column allows creation or deletion of cloned wireless
|
||
|
interfaces."
|
||
|
::= { wlanInterfaceEntry 8 }
|
||
|
|
||
|
wlanIfaceState OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
up(1),
|
||
|
down(2)
|
||
|
}
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The operating state of the interface."
|
||
|
::= { wlanInterfaceEntry 9 }
|
||
|
|
||
|
wlanIfParentTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfParentEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains information about the parent hardware
|
||
|
interface of every cloned wireless interface in the system."
|
||
|
::= { begemotWlanInterface 2 }
|
||
|
|
||
|
wlanIfParentEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfParentEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Information for the parent hardware interface of a cloned
|
||
|
wireless interface."
|
||
|
AUGMENTS { wlanInterfaceEntry }
|
||
|
::= { wlanIfParentTable 1 }
|
||
|
|
||
|
WlanIfParentEntry ::= SEQUENCE {
|
||
|
wlanIfParentDriverCapabilities BITS,
|
||
|
wlanIfParentCryptoCapabilities BITS,
|
||
|
wlanIfParentHTCapabilities BITS
|
||
|
}
|
||
|
|
||
|
wlanIfParentDriverCapabilities OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
station(1),
|
||
|
ieee8023encap(2),
|
||
|
athFastFrames(3),
|
||
|
athTurbo(4),
|
||
|
ibss(5),
|
||
|
pmgt(6),
|
||
|
hostAp(7),
|
||
|
ahDemo(8),
|
||
|
swRetry(9),
|
||
|
txPmgt(10),
|
||
|
shortSlot(11),
|
||
|
shortPreamble(12),
|
||
|
monitor(13),
|
||
|
dfs(14),
|
||
|
mbss(15),
|
||
|
wpa1(16),
|
||
|
wpa2(17),
|
||
|
burst(18),
|
||
|
wme(19),
|
||
|
wds(20),
|
||
|
bgScan(21),
|
||
|
txFrag(22),
|
||
|
tdma(23)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The driver capabilities of this cloned interface's parent."
|
||
|
::= { wlanIfParentEntry 1 }
|
||
|
|
||
|
wlanIfParentCryptoCapabilities OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
wep(1),
|
||
|
tkip(2),
|
||
|
aes(3),
|
||
|
aesCcm(4),
|
||
|
tkipMic(5),
|
||
|
ckip(6)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The hardware cryptographic capabilities of this cloned
|
||
|
interface's parent."
|
||
|
::= { wlanIfParentEntry 2 }
|
||
|
|
||
|
wlanIfParentHTCapabilities OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
ldpc(1),
|
||
|
chwidth40(2),
|
||
|
greenField(3),
|
||
|
shortGi20(4),
|
||
|
shortGi40(5),
|
||
|
txStbc(6),
|
||
|
delba(7),
|
||
|
amsdu7935(8),
|
||
|
dssscck40(9),
|
||
|
psmp(10),
|
||
|
fortyMHzIntolerant(11),
|
||
|
lsigTxOpProt(12),
|
||
|
htcAmpdu(13),
|
||
|
htcAmsdu(14),
|
||
|
htcHt(15),
|
||
|
htcSmps(16),
|
||
|
htcRifs(17)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The hardware High Throughput capabilities of this cloned
|
||
|
interface's parent."
|
||
|
::= { wlanIfParentEntry 3 }
|
||
|
|
||
|
wlanIfaceConfigTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfaceConfigEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains a list of configuration parameters per
|
||
|
cloned wireless interface. Some of the parameters may not be
|
||
|
applicable depending on the underlying device's hardware
|
||
|
capabilities and operating mode of the virtual interface."
|
||
|
::= { begemotWlanInterface 3 }
|
||
|
|
||
|
wlanIfaceConfigEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfaceConfigEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A list of configuration parameters for a cloned wireless interface."
|
||
|
AUGMENTS { wlanInterfaceEntry }
|
||
|
::= { wlanIfaceConfigTable 1 }
|
||
|
|
||
|
WlanIfaceConfigEntry ::= SEQUENCE {
|
||
|
wlanIfacePacketBurst TruthValue,
|
||
|
wlanIfaceCountryCode OCTET STRING,
|
||
|
wlanIfaceRegDomain INTEGER,
|
||
|
wlanIfaceDesiredSsid OCTET STRING,
|
||
|
wlanIfaceDesiredChannel INTEGER,
|
||
|
wlanIfaceDynamicFreqSelection TruthValue,
|
||
|
wlanIfaceFastFrames TruthValue,
|
||
|
wlanIfaceDturbo TruthValue,
|
||
|
wlanIfaceTxPower INTEGER,
|
||
|
wlanIfaceFragmentThreshold INTEGER,
|
||
|
wlanIfaceRTSThreshold INTEGER,
|
||
|
wlanIfaceWlanPrivacySubscribe TruthValue,
|
||
|
-- Parameters for station mode
|
||
|
wlanIfaceBgScan TruthValue,
|
||
|
wlanIfaceBgScanIdle INTEGER,
|
||
|
wlanIfaceBgScanInterval INTEGER,
|
||
|
wlanIfaceBeaconMissedThreshold INTEGER,
|
||
|
wlanIfaceDesiredBssid MacAddress,
|
||
|
wlanIfaceRoamingMode INTEGER,
|
||
|
-- Additional parameters when operating in host-ap/ad-hoc mode
|
||
|
wlanIfaceDot11d TruthValue,
|
||
|
wlanIfaceDot11h TruthValue,
|
||
|
wlanIfaceDynamicWds TruthValue,
|
||
|
wlanIfacePowerSave TruthValue,
|
||
|
wlanIfaceApBridge TruthValue,
|
||
|
wlanIfaceBeaconInterval INTEGER,
|
||
|
wlanIfaceDtimPeriod INTEGER,
|
||
|
wlanIfaceHideSsid TruthValue,
|
||
|
wlanIfaceInactivityProccess TruthValue,
|
||
|
wlanIfaceDot11gProtMode INTEGER,
|
||
|
wlanIfaceDot11gPureMode TruthValue,
|
||
|
wlanIfaceDot11nPureMode TruthValue,
|
||
|
wlanIfaceDot11nAmpdu INTEGER,
|
||
|
wlanIfaceDot11nAmpduDensity INTEGER,
|
||
|
wlanIfaceDot11nAmpduLimit INTEGER,
|
||
|
wlanIfaceDot11nAmsdu INTEGER,
|
||
|
wlanIfaceDot11nAmsduLimit INTEGER,
|
||
|
wlanIfaceDot11nHighThroughput TruthValue,
|
||
|
wlanIfaceDot11nHTCompatible TruthValue,
|
||
|
wlanIfaceDot11nHTProtMode INTEGER,
|
||
|
wlanIfaceDot11nRIFS TruthValue,
|
||
|
wlanIfaceDot11nShortGI TruthValue,
|
||
|
wlanIfaceDot11nSMPSMode INTEGER,
|
||
|
-- Parameters when operating in tdma mode
|
||
|
wlanIfaceTdmaSlot INTEGER,
|
||
|
wlanIfaceTdmaSlotCount INTEGER,
|
||
|
wlanIfaceTdmaSlotLength INTEGER,
|
||
|
wlanIfaceTdmaBeaconInterval INTEGER
|
||
|
}
|
||
|
|
||
|
wlanIfacePacketBurst OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls whether packet bursting is
|
||
|
enabled on the interface."
|
||
|
::= { wlanIfaceConfigEntry 1 }
|
||
|
|
||
|
wlanIfaceCountryCode OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING (SIZE(3))
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls the country regulatory
|
||
|
constraints for operation of this wireless interface. The first
|
||
|
two octets of this string is the two character country code as
|
||
|
described in ISO/IEC 3166-1. The third octet shall contain one
|
||
|
of the following:
|
||
|
|
||
|
1. an ASCII space character, if the regulations under which the
|
||
|
interface is operating include all environments in the specified
|
||
|
country.
|
||
|
|
||
|
2. an ASCII 'O' character, if the country's regulations are for
|
||
|
Outdoor environment only.
|
||
|
|
||
|
3. an ASCII 'I' character, if the country's regulations are for
|
||
|
Indoor environment only."
|
||
|
::= { wlanIfaceConfigEntry 2 }
|
||
|
|
||
|
wlanIfaceRegDomain OBJECT-TYPE
|
||
|
SYNTAX WlanRegDomainCode
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This object specifies the regulatory domain to use when calculating
|
||
|
the regulatory constraints for operation of the interface."
|
||
|
::= { wlanIfaceConfigEntry 3 }
|
||
|
|
||
|
wlanIfaceDesiredSsid OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING (SIZE(0..32))
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The desired SSID for the interface as an ASCII string.
|
||
|
Specifying an empty string shall remove the current configured
|
||
|
SSID."
|
||
|
::= { wlanIfaceConfigEntry 4 }
|
||
|
|
||
|
wlanIfaceDesiredChannel OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The desired operating channel for this interface. The value of this
|
||
|
column is the channel index (wlanIfaceChannelId) of the corresponding
|
||
|
entry from the wlanIfaceChannelTable. The interface status must be
|
||
|
down so that the current operating channel may be set properly."
|
||
|
::= { wlanIfaceConfigEntry 5 }
|
||
|
|
||
|
wlanIfaceDynamicFreqSelection OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether Dynamic Frequency
|
||
|
Selection (DFS) as specified in 802.11h is enabled on an
|
||
|
interface that supports 802.11h and DFS."
|
||
|
DEFVAL { false }
|
||
|
::= { wlanIfaceConfigEntry 6 }
|
||
|
|
||
|
wlanIfaceFastFrames OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls whether use of Atheros Fast
|
||
|
Frames is enabled when when communicating with another Fast
|
||
|
Frames-capable station. The value is only meaningful for
|
||
|
interfaces that support Atheros Fast Frames."
|
||
|
::= { wlanIfaceConfigEntry 7 }
|
||
|
|
||
|
wlanIfaceDturbo OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls whether use of Atheros Dynamic
|
||
|
Turbo mode is enabled when when communicating with another Dynamic
|
||
|
Turbo-capable station. The value is only meaningful for interfaces
|
||
|
that support Atheros Dynamic Turbo mode."
|
||
|
::= { wlanIfaceConfigEntry 8 }
|
||
|
|
||
|
wlanIfaceTxPower OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls the power used to transmit
|
||
|
frames. Accepted values are in units of one tenths of a dBm in
|
||
|
steps of .5 dBm, e.g setting the value of this object to 155
|
||
|
results in 15.5 dBm transmit power configured on the interface."
|
||
|
::= { wlanIfaceConfigEntry 9 }
|
||
|
|
||
|
wlanIfaceFragmentThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER (256..2346)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls the threshold for which
|
||
|
transmitted frames are broken into fragments. Setting the value
|
||
|
of this object to 2346 will disable transmit fragmentation."
|
||
|
DEFVAL { 2346 }
|
||
|
::= { wlanIfaceConfigEntry 10 }
|
||
|
|
||
|
wlanIfaceRTSThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..2346)
|
||
|
UNITS "bytes"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object controls the threshold for which
|
||
|
transmitted frames are preceded by transmission of an RTS
|
||
|
control frame. Setting the value of this object to 2346 will
|
||
|
disable transmission of RTS frames."
|
||
|
DEFVAL { 2346 }
|
||
|
::= { wlanIfaceConfigEntry 11 }
|
||
|
|
||
|
wlanIfaceWlanPrivacySubscribe OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether Wireless Privacy
|
||
|
Subscriber support is enabled on the interface."
|
||
|
::= { wlanIfaceConfigEntry 12 }
|
||
|
|
||
|
wlanIfaceBgScan OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether background scanning
|
||
|
is enabled for an interface operating in station mode."
|
||
|
::= { wlanIfaceConfigEntry 13 }
|
||
|
|
||
|
wlanIfaceBgScanIdle OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the minimum time a station must
|
||
|
be idle before a background scan is initiated on an interface
|
||
|
operating in station mode."
|
||
|
DEFVAL { 250 }
|
||
|
::= { wlanIfaceConfigEntry 14 }
|
||
|
|
||
|
wlanIfaceBgScanInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the interval at which background
|
||
|
scanning is attempted when operating in station mode."
|
||
|
DEFVAL { 300 }
|
||
|
::= { wlanIfaceConfigEntry 15 }
|
||
|
|
||
|
wlanIfaceBeaconMissedThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..255)
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the number of consecutive missed
|
||
|
beacons before an interface operating in station mode will attempt
|
||
|
to search for a new access point."
|
||
|
DEFVAL { 7 }
|
||
|
::= { wlanIfaceConfigEntry 16 }
|
||
|
|
||
|
wlanIfaceDesiredBssid OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the MAC address of the desired
|
||
|
access point to use when an interface is operating as a station."
|
||
|
::= { wlanIfaceConfigEntry 17 }
|
||
|
|
||
|
wlanIfaceRoamingMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
device(1),
|
||
|
auto(2),
|
||
|
manual(3)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the desired system behavior
|
||
|
when the interface is operating as a station and the communication
|
||
|
with the current access point is broken."
|
||
|
DEFVAL { auto }
|
||
|
::= { wlanIfaceConfigEntry 18 }
|
||
|
|
||
|
wlanIfaceDot11d OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether 802.11d specification
|
||
|
support is enabled."
|
||
|
DEFVAL { false }
|
||
|
::= { wlanIfaceConfigEntry 19 }
|
||
|
|
||
|
wlanIfaceDot11h OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether 802.11h support
|
||
|
including spectrum management is enabled. The value is only
|
||
|
meaningfull for interfaces that support 802.11h specification."
|
||
|
DEFVAL { false }
|
||
|
::= { wlanIfaceConfigEntry 20 }
|
||
|
|
||
|
wlanIfaceDynamicWds OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether Dynamic WDS (DWDS)
|
||
|
support is enabled. The value is only meaningful for interfaces
|
||
|
that support Dynamic WDS."
|
||
|
::= { wlanIfaceConfigEntry 21 }
|
||
|
|
||
|
wlanIfacePowerSave OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether powersave operation
|
||
|
is enabled. The value is only meaningful for interfaces that
|
||
|
support powersave operation."
|
||
|
::= { wlanIfaceConfigEntry 22 }
|
||
|
|
||
|
wlanIfaceApBridge OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether packets between
|
||
|
wireless clients will be passed directly by an interface
|
||
|
operating in host ap mode. Disabling it may be useful in
|
||
|
situations when traffic between wireless clients needs to be
|
||
|
processed with packet filtering."
|
||
|
DEFVAL { true }
|
||
|
::= { wlanIfaceConfigEntry 23 }
|
||
|
|
||
|
wlanIfaceBeaconInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER (25..1000)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the interval at with beacon
|
||
|
frames are sent when an interface is operating in ad-hoc or ap
|
||
|
mode. The beacon interval is specified in TU's (1024 usecs)."
|
||
|
DEFVAL { 100 }
|
||
|
::= { wlanIfaceConfigEntry 24 }
|
||
|
|
||
|
wlanIfaceDtimPeriod OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..15)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the DTIM period at which
|
||
|
buffered multicast data frames are transmitted by an interface
|
||
|
operating in host ap mode. Its value indicates the number of
|
||
|
beacon intervals between DTIM."
|
||
|
DEFVAL { 1 }
|
||
|
::= { wlanIfaceConfigEntry 25 }
|
||
|
|
||
|
wlanIfaceHideSsid OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether broadcasting of the
|
||
|
SSID in beacon frames and responding to undirected probe request
|
||
|
frames is enabled for an interface operating in ap mode."
|
||
|
DEFVAL { false }
|
||
|
::= { wlanIfaceConfigEntry 26 }
|
||
|
|
||
|
wlanIfaceInactivityProccess OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether inactivity processing
|
||
|
for associated station on an interface operating in ap mode is
|
||
|
enabled."
|
||
|
DEFVAL { true }
|
||
|
::= { wlanIfaceConfigEntry 27 }
|
||
|
|
||
|
wlanIfaceDot11gProtMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
off(1),
|
||
|
cts(2),
|
||
|
rtscts(3)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the technique used for
|
||
|
protecting OFDM frames in a mixed 11b/11g network."
|
||
|
::= { wlanIfaceConfigEntry 28 }
|
||
|
|
||
|
wlanIfaceDot11gPureMode OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether only 802.11g-capable
|
||
|
stations will be allowed to associate to an interface operating
|
||
|
as access point in 802.11g mode."
|
||
|
::= { wlanIfaceConfigEntry 29 }
|
||
|
|
||
|
wlanIfaceDot11nPureMode OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether only HT-capable
|
||
|
stations will be allowed to associate to an interface operating
|
||
|
as access point in 802.11n mode."
|
||
|
::= { wlanIfaceConfigEntry 30 }
|
||
|
|
||
|
wlanIfaceDot11nAmpdu OBJECT-TYPE
|
||
|
SYNTAX WlanIfaceDot11nPduType
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether sending and
|
||
|
receiving of AMPDU frames is enabled on an interface
|
||
|
operating in 802.11n mode."
|
||
|
DEFVAL { txAndRx }
|
||
|
::= { wlanIfaceConfigEntry 31 }
|
||
|
|
||
|
wlanIfaceDot11nAmpduDensity OBJECT-TYPE
|
||
|
SYNTAX INTEGER (0|25|50|100|200|400|800|1600)
|
||
|
UNITS "1/100ths-of-microsecond"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the AMPDU density parameter
|
||
|
for an interface operating in 802.11n mode."
|
||
|
::= { wlanIfaceConfigEntry 32 }
|
||
|
|
||
|
wlanIfaceDot11nAmpduLimit OBJECT-TYPE
|
||
|
SYNTAX INTEGER (8192|16384|32768|65536)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies a limit on the AMPDU packet
|
||
|
size for receiving AMPDU frames for an interface operating in
|
||
|
802.11n mode."
|
||
|
::= { wlanIfaceConfigEntry 33 }
|
||
|
|
||
|
wlanIfaceDot11nAmsdu OBJECT-TYPE
|
||
|
SYNTAX WlanIfaceDot11nPduType
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether sending and receiving
|
||
|
of AMSDU frames is enabled on an interface operating in 802.11n
|
||
|
mode."
|
||
|
DEFVAL { rxOnly }
|
||
|
::= { wlanIfaceConfigEntry 34 }
|
||
|
|
||
|
wlanIfaceDot11nAmsduLimit OBJECT-TYPE
|
||
|
SYNTAX INTEGER (3839|7935)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies a limit on the AMSDU packet
|
||
|
size when sending and receiving AMSDU frames for an interface
|
||
|
operating in 802.11n mode."
|
||
|
::= { wlanIfaceConfigEntry 35 }
|
||
|
|
||
|
wlanIfaceDot11nHighThroughput OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether use of High Throughput
|
||
|
(HT) is enabled for an interface operating in 802.11n mode."
|
||
|
DEFVAL { true }
|
||
|
::= { wlanIfaceConfigEntry 36 }
|
||
|
|
||
|
wlanIfaceDot11nHTCompatible OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether use of compatibility
|
||
|
support for pre-802.11n devices is enabled for an interface
|
||
|
operating in 802.11n mode."
|
||
|
DEFVAL { true }
|
||
|
::= { wlanIfaceConfigEntry 37 }
|
||
|
|
||
|
wlanIfaceDot11nHTProtMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
off(1),
|
||
|
rts(2)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the technique used for
|
||
|
protecting HT frames in a mixed legacy/HT network for interfaces
|
||
|
operating in 802.11n mode."
|
||
|
DEFVAL { rts }
|
||
|
::= { wlanIfaceConfigEntry 38 }
|
||
|
|
||
|
wlanIfaceDot11nRIFS OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether Reduced InterFrame
|
||
|
Spacing (RIFS) is enabled for an interface operating in 802.11n
|
||
|
mode on an HT channel."
|
||
|
::= { wlanIfaceConfigEntry 39 }
|
||
|
|
||
|
wlanIfaceDot11nShortGI OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether use of Short Guard
|
||
|
Interval is enabled on an interface operating in 802.11n mode
|
||
|
on an HT channel."
|
||
|
::= { wlanIfaceConfigEntry 40 }
|
||
|
|
||
|
wlanIfaceDot11nSMPSMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disabled(1),
|
||
|
static(2),
|
||
|
dynamic(3)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies whether use of Spatial Multiplexing
|
||
|
Power Save (SMPS) is enabled on an interface operating in 802.11n mode
|
||
|
and whether SMPS mode is set to Static or Dynamic. The value is only
|
||
|
meaningfull for interfaces that support SMPS."
|
||
|
::= { wlanIfaceConfigEntry 41 }
|
||
|
|
||
|
wlanIfaceTdmaSlot OBJECT-TYPE
|
||
|
SYNTAX INTEGER (0..2)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the slot configuration to use
|
||
|
when operating in TDMA mode."
|
||
|
::= { wlanIfaceConfigEntry 42 }
|
||
|
|
||
|
wlanIfaceTdmaSlotCount OBJECT-TYPE
|
||
|
SYNTAX INTEGER (0..2)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the number of slots to use to
|
||
|
setup a BSS for an interface operating in TDMA mode."
|
||
|
::= { wlanIfaceConfigEntry 43 }
|
||
|
|
||
|
wlanIfaceTdmaSlotLength OBJECT-TYPE
|
||
|
SYNTAX INTEGER (150..65000)
|
||
|
UNITS "microseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies a slot length that each station
|
||
|
has when a BSS is setup by an interface operating in TDMA mode."
|
||
|
DEFVAL { 10000 }
|
||
|
::= { wlanIfaceConfigEntry 44 }
|
||
|
|
||
|
wlanIfaceTdmaBeaconInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the number of superframes at
|
||
|
which a beacon frame is sent to synchronize the TDMA slot timing
|
||
|
for interfaces operating in TDMA mode."
|
||
|
DEFVAL { 5 }
|
||
|
::= { wlanIfaceConfigEntry 45 }
|
||
|
|
||
|
wlanIfacePeerTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfacePeerEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains information about the associated stations
|
||
|
for an interface operating as an access point, or the stations
|
||
|
identified as neighbors in the IBSS for an interface operating in
|
||
|
adhoc mode."
|
||
|
::= { begemotWlanInterface 4 }
|
||
|
|
||
|
wlanIfacePeerEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfacePeerEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An entry that contains information for the associated stations
|
||
|
for an interface operating as an access point, or the neighboring
|
||
|
stations of an interface in adhoc mode."
|
||
|
INDEX { wlanIfaceName, wlanIfacePeerAddress }
|
||
|
::= { wlanIfacePeerTable 1 }
|
||
|
|
||
|
WlanIfacePeerEntry ::= SEQUENCE {
|
||
|
wlanIfacePeerAddress MacAddress,
|
||
|
wlanIfacePeerAssociationId INTEGER,
|
||
|
wlanIfacePeerVlanTag INTEGER,
|
||
|
wlanIfacePeerFrequency INTEGER,
|
||
|
wlanIfacePeerCurrentTXRate INTEGER,
|
||
|
wlanIfacePeerRxSignalStrength INTEGER,
|
||
|
wlanIfacePeerIdleTimer INTEGER,
|
||
|
wlanIfacePeerTxSequenceNo INTEGER,
|
||
|
wlanIfacePeerRxSequenceNo INTEGER,
|
||
|
wlanIfacePeerTxPower INTEGER,
|
||
|
wlanIfacePeerCapabilities BITS,
|
||
|
wlanIfacePeerFlags BITS
|
||
|
}
|
||
|
|
||
|
wlanIfacePeerAddress OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The MAC address of this peer."
|
||
|
::= { wlanIfacePeerEntry 1 }
|
||
|
|
||
|
wlanIfacePeerAssociationId OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The ID of the associacition with this peer."
|
||
|
::= { wlanIfacePeerEntry 2 }
|
||
|
|
||
|
wlanIfacePeerVlanTag OBJECT-TYPE
|
||
|
SYNTAX INTEGER (0..4096)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The Vlan Tag for traffic to/from this peer."
|
||
|
::= { wlanIfacePeerEntry 3 }
|
||
|
|
||
|
wlanIfacePeerFrequency OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The operating frequency for the link with this peer."
|
||
|
::= { wlanIfacePeerEntry 4 }
|
||
|
|
||
|
wlanIfacePeerCurrentTXRate OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The current transmit rate for this peer."
|
||
|
::= { wlanIfacePeerEntry 5 }
|
||
|
|
||
|
wlanIfacePeerRxSignalStrength OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The average receive signal strength for this peer."
|
||
|
::= { wlanIfacePeerEntry 6 }
|
||
|
|
||
|
wlanIfacePeerIdleTimer OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this peer's inactivity timer."
|
||
|
::= { wlanIfacePeerEntry 7 }
|
||
|
|
||
|
wlanIfacePeerTxSequenceNo OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last sequence number transmitted to this peer."
|
||
|
::= { wlanIfacePeerEntry 8 }
|
||
|
|
||
|
wlanIfacePeerRxSequenceNo OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last sequence number received from this peer."
|
||
|
::= { wlanIfacePeerEntry 9 }
|
||
|
|
||
|
wlanIfacePeerTxPower OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The transmit power limit for this peer."
|
||
|
::= { wlanIfacePeerEntry 10 }
|
||
|
|
||
|
wlanIfacePeerCapabilities OBJECT-TYPE
|
||
|
SYNTAX WlanPeerCapabilityFlags
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The capabilities advertised by this peer."
|
||
|
::= { wlanIfacePeerEntry 11 }
|
||
|
|
||
|
wlanIfacePeerFlags OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
authorizedForData(1),
|
||
|
qosEnabled(2),
|
||
|
erpEnabled(3),
|
||
|
powerSaveMode(4),
|
||
|
authRefHeld(5),
|
||
|
htEnabled(6),
|
||
|
htCompat(7),
|
||
|
wpsAssoc(8),
|
||
|
tsnAssoc(9),
|
||
|
ampduRx(10),
|
||
|
ampduTx(11),
|
||
|
mimoPowerSave(12),
|
||
|
sendRts(13),
|
||
|
rifs(14),
|
||
|
shortGiHT20(15),
|
||
|
shortGiHT40(16),
|
||
|
amsduRx(17),
|
||
|
amsduTx(18)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The peer state flags."
|
||
|
::= { wlanIfacePeerEntry 12 }
|
||
|
|
||
|
wlanIfaceChannelTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfaceChannelEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains information about the active channels for
|
||
|
the cloned wireless interfaces in the system."
|
||
|
::= { begemotWlanInterface 5 }
|
||
|
|
||
|
wlanIfaceChannelEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfaceChannelEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An entry that contains active channel information for the wireless
|
||
|
interface."
|
||
|
INDEX { wlanIfaceName, wlanIfaceChannelId }
|
||
|
::= { wlanIfaceChannelTable 1 }
|
||
|
|
||
|
WlanIfaceChannelEntry ::= SEQUENCE {
|
||
|
wlanIfaceChannelId INTEGER,
|
||
|
wlanIfaceChannelIeeeId INTEGER,
|
||
|
wlanIfaceChannelType INTEGER,
|
||
|
wlanIfaceChannelFlags BITS,
|
||
|
wlanIfaceChannelFrequency INTEGER,
|
||
|
wlanIfaceChannelMaxRegPower INTEGER,
|
||
|
wlanIfaceChannelMaxTxPower INTEGER,
|
||
|
wlanIfaceChannelMinTxPower INTEGER,
|
||
|
wlanIfaceChannelState BITS,
|
||
|
wlanIfaceChannelHTExtension INTEGER,
|
||
|
wlanIfaceChannelMaxAntennaGain INTEGER
|
||
|
}
|
||
|
|
||
|
wlanIfaceChannelId OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..1536)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The index of this channel entry."
|
||
|
::= { wlanIfaceChannelEntry 1 }
|
||
|
|
||
|
wlanIfaceChannelIeeeId OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..256)
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The channel IEEE ID."
|
||
|
::= { wlanIfaceChannelEntry 2 }
|
||
|
|
||
|
wlanIfaceChannelType OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
fhss(1),
|
||
|
dot11a(2),
|
||
|
dot11b(3),
|
||
|
dot11g(4),
|
||
|
tenMHz(5),
|
||
|
fiveMHz(6),
|
||
|
turbo(7),
|
||
|
ht(8)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The operating channel type for this entry."
|
||
|
::= { wlanIfaceChannelEntry 3 }
|
||
|
|
||
|
wlanIfaceChannelFlags OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
turbo(1),
|
||
|
cck(2),
|
||
|
ofdm(3),
|
||
|
spectrum2Ghz(4),
|
||
|
spectrum5Ghz(5),
|
||
|
passiveScan(6),
|
||
|
dynamicCckOfdm(7),
|
||
|
gfsk(8),
|
||
|
spectrum900Mhz(9),
|
||
|
dot11aStaticTurbo(10),
|
||
|
halfRate(11),
|
||
|
quarterRate(12),
|
||
|
ht20(13),
|
||
|
ht40u(14),
|
||
|
ht40d(15),
|
||
|
dfs(16),
|
||
|
xmit4ms(17),
|
||
|
noAdhoc(18),
|
||
|
noHostAp(19),
|
||
|
dot11d(20)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The channel flags."
|
||
|
::= { wlanIfaceChannelEntry 4 }
|
||
|
|
||
|
wlanIfaceChannelFrequency OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The channel frequency setting in MHz."
|
||
|
::= { wlanIfaceChannelEntry 5 }
|
||
|
|
||
|
wlanIfaceChannelMaxRegPower OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum regulatory tx power in dBm for this channel."
|
||
|
::= { wlanIfaceChannelEntry 6 }
|
||
|
|
||
|
wlanIfaceChannelMaxTxPower OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum tx power in units of .5 dBm for this channel."
|
||
|
::= { wlanIfaceChannelEntry 7 }
|
||
|
|
||
|
wlanIfaceChannelMinTxPower OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The minimum tx power in units of .5 dBm for this channel."
|
||
|
::= { wlanIfaceChannelEntry 8 }
|
||
|
|
||
|
wlanIfaceChannelState OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
radar(1),
|
||
|
cacDone(2),
|
||
|
interferenceDetected(3),
|
||
|
radarClear(4)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The channel dynamic state."
|
||
|
::= { wlanIfaceChannelEntry 9 }
|
||
|
|
||
|
wlanIfaceChannelHTExtension OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The HT40 extension channel number."
|
||
|
::= { wlanIfaceChannelEntry 10 }
|
||
|
|
||
|
wlanIfaceChannelMaxAntennaGain OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum antenna gain in units of .5 dBm."
|
||
|
::= { wlanIfaceChannelEntry 11 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- The Scan requests/results for cloned wireless interfaces
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
wlanScanConfigTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanScanConfigEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains a configuration for channel scanning
|
||
|
initiated via SNMP."
|
||
|
::= { begemotWlanScanning 1 }
|
||
|
|
||
|
wlanScanConfigEntry OBJECT-TYPE
|
||
|
SYNTAX WlanScanConfigEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Per cloned wireless interface channel scan configuration data.
|
||
|
The entry will be empty if no scans were initiated via SNMP."
|
||
|
INDEX { wlanIfaceName }
|
||
|
::= { wlanScanConfigTable 1 }
|
||
|
|
||
|
WlanScanConfigEntry ::= SEQUENCE {
|
||
|
wlanScanFlags BITS,
|
||
|
wlanScanDuration INTEGER,
|
||
|
wlanScanMinChannelDwellTime INTEGER,
|
||
|
wlanScanMaxChannelDwellTime INTEGER,
|
||
|
wlanScanConfigStatus INTEGER
|
||
|
}
|
||
|
|
||
|
wlanScanFlags OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
noSelection(1),
|
||
|
activeScan(2),
|
||
|
pickFirst(3),
|
||
|
backgroundScan(4),
|
||
|
once(5),
|
||
|
noBroadcast(6),
|
||
|
noAutoSequencing(7),
|
||
|
flushCashe(8),
|
||
|
chechCashe(9)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Desired flags for the channel scan."
|
||
|
::= { wlanScanConfigEntry 1 }
|
||
|
|
||
|
wlanScanDuration OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..2147483647)
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The desired duration of the scan. Setting the value of this object
|
||
|
to the highest allowed value will initiate an infinite scan."
|
||
|
::= { wlanScanConfigEntry 2 }
|
||
|
|
||
|
wlanScanMinChannelDwellTime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The minimum channel dwelltime for this scan."
|
||
|
::= { wlanScanConfigEntry 3 }
|
||
|
|
||
|
wlanScanMaxChannelDwellTime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum channel dwelltime for this scan."
|
||
|
::= { wlanScanConfigEntry 4 }
|
||
|
|
||
|
wlanScanConfigStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
unknown(0),
|
||
|
notStarted(1),
|
||
|
running(2),
|
||
|
finished(3),
|
||
|
cancel(4)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This object is used to initiate or cancel channel scanning on the cloned
|
||
|
interface via SNMP. Setting its value to running(2) will initiate channel
|
||
|
scanning on the cloned interface, while setting the value to cancel will
|
||
|
cancel the current ongoing scan. All other values should be returned in
|
||
|
GET operations only."
|
||
|
::= { wlanScanConfigEntry 5 }
|
||
|
|
||
|
wlanScanResultsTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanScanResultsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains scan results for a virtual wireless interface."
|
||
|
::= { begemotWlanScanning 2 }
|
||
|
|
||
|
wlanScanResultsEntry OBJECT-TYPE
|
||
|
SYNTAX WlanScanResultsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Per virtual wireless interface channel scan results data."
|
||
|
INDEX { wlanIfaceName, wlanScanResultID, wlanScanResultBssid }
|
||
|
::= { wlanScanResultsTable 1 }
|
||
|
|
||
|
WlanScanResultsEntry ::= SEQUENCE {
|
||
|
wlanScanResultID OCTET STRING,
|
||
|
wlanScanResultBssid MacAddress,
|
||
|
wlanScanResultChannel INTEGER,
|
||
|
wlanScanResultRate INTEGER,
|
||
|
wlanScanResultNoise INTEGER,
|
||
|
wlanScanResultBeaconInterval INTEGER,
|
||
|
wlanScanResultCapabilities BITS
|
||
|
}
|
||
|
|
||
|
wlanScanResultID OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING (SIZE(0..32))
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The SSID/MESH ID for this scan result entry."
|
||
|
::= { wlanScanResultsEntry 1 }
|
||
|
|
||
|
wlanScanResultBssid OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The BSSID for this scan result entry."
|
||
|
::= { wlanScanResultsEntry 2 }
|
||
|
|
||
|
wlanScanResultChannel OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The operating channel for this scan result entry."
|
||
|
::= { wlanScanResultsEntry 3 }
|
||
|
|
||
|
wlanScanResultRate OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The operating rate of this scan result entry."
|
||
|
::= { wlanScanResultsEntry 4 }
|
||
|
|
||
|
wlanScanResultNoise OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The channel noise for this scan result entry."
|
||
|
::= { wlanScanResultsEntry 5 }
|
||
|
|
||
|
wlanScanResultBeaconInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The beacon interval reported for this scan result entry."
|
||
|
::= { wlanScanResultsEntry 6 }
|
||
|
|
||
|
wlanScanResultCapabilities OBJECT-TYPE
|
||
|
SYNTAX WlanPeerCapabilityFlags
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The capabilities advertised for this scan result entry."
|
||
|
::= { wlanScanResultsEntry 7 }
|
||
|
|
||
|
wlanIfRoamParamsTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfRoamParamsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains the parameters that govern the roaming
|
||
|
operation on a wireless interface."
|
||
|
::= { begemotWlanInterface 6 }
|
||
|
|
||
|
wlanIfRoamParamsEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfRoamParamsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An entry that contains the roaming parameters of a wireless
|
||
|
interface."
|
||
|
INDEX { wlanIfaceName, wlanIfRoamPhyMode }
|
||
|
::= { wlanIfRoamParamsTable 1 }
|
||
|
|
||
|
WlanIfRoamParamsEntry ::= SEQUENCE {
|
||
|
wlanIfRoamPhyMode INTEGER,
|
||
|
wlanIfRoamRxSignalStrength INTEGER,
|
||
|
wlanIfRoamTxRateThreshold INTEGER
|
||
|
}
|
||
|
|
||
|
wlanIfRoamPhyMode OBJECT-TYPE
|
||
|
SYNTAX WlanIfPhyMode
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The PHY mode for this roaming parameters entry."
|
||
|
::= { wlanIfRoamParamsEntry 1 }
|
||
|
|
||
|
wlanIfRoamRxSignalStrength OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The Receive Signal Strength for this roaming parameters entry."
|
||
|
::= { wlanIfRoamParamsEntry 2 }
|
||
|
|
||
|
wlanIfRoamTxRateThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The transmit rate threshold value for this roaming parameters
|
||
|
entry in Mb/s or MCS."
|
||
|
::= { wlanIfRoamParamsEntry 3 }
|
||
|
|
||
|
wlanIfTxParamsTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfTxParamsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains the parameters that govern the transmit
|
||
|
operation on a wireless interface."
|
||
|
::= { begemotWlanInterface 7 }
|
||
|
|
||
|
wlanIfTxParamsEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfTxParamsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An entry that contains the transmit parameters of a wireless
|
||
|
interface."
|
||
|
INDEX { wlanIfaceName, wlanIfTxPhyMode }
|
||
|
::= { wlanIfTxParamsTable 1 }
|
||
|
|
||
|
WlanIfTxParamsEntry ::= SEQUENCE {
|
||
|
wlanIfTxPhyMode INTEGER,
|
||
|
wlanIfTxUnicastRate INTEGER,
|
||
|
wlanIfTxMcastRate INTEGER,
|
||
|
wlanIfTxMgmtRate INTEGER,
|
||
|
wlanIfTxMaxRetryCount INTEGER
|
||
|
}
|
||
|
|
||
|
wlanIfTxPhyMode OBJECT-TYPE
|
||
|
SYNTAX WlanIfPhyMode
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The PHY mode for this entry."
|
||
|
::= { wlanIfTxParamsEntry 1 }
|
||
|
|
||
|
wlanIfTxUnicastRate OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies a fixed rate for transmitting
|
||
|
unicast frames in this phy mode."
|
||
|
::= { wlanIfTxParamsEntry 2 }
|
||
|
|
||
|
wlanIfTxMcastRate OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies a fixed rate for transmitting
|
||
|
broadcast and multicast frames in this phy mode."
|
||
|
::= { wlanIfTxParamsEntry 3 }
|
||
|
|
||
|
wlanIfTxMgmtRate OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies a fixed rate for transmitting
|
||
|
management and/or control frames in this phy mode."
|
||
|
::= { wlanIfTxParamsEntry 4 }
|
||
|
|
||
|
wlanIfTxMaxRetryCount OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum number of tries to use when sending unicast frames
|
||
|
in this phy mode."
|
||
|
::= { wlanIfTxParamsEntry 5 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- The Statistics Database for Wireless interfaces
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
wlanIfaceStatisticsTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanIfaceStatisticsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains summary statistics for each virtual wireless
|
||
|
interface on the managed device."
|
||
|
::= { begemotWlanStatistics 1 }
|
||
|
|
||
|
wlanIfaceStatisticsEntry OBJECT-TYPE
|
||
|
SYNTAX WlanIfaceStatisticsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A list of statistics for each virtual wireless interface."
|
||
|
AUGMENTS { wlanInterfaceEntry }
|
||
|
::= { wlanIfaceStatisticsTable 1 }
|
||
|
|
||
|
WlanIfaceStatisticsEntry ::= SEQUENCE {
|
||
|
wlanStatsRxBadVersion Counter32,
|
||
|
wlanStatsRxTooShort Counter32,
|
||
|
wlanStatsRxWrongBssid Counter32,
|
||
|
wlanStatsRxDiscardedDups Counter32,
|
||
|
wlanStatsRxWrongDir Counter32,
|
||
|
wlanStatsRxDiscardMcastEcho Counter32,
|
||
|
wlanStatsRxDiscardNoAssoc Counter32,
|
||
|
wlanStatsRxWepNoPrivacy Counter32,
|
||
|
wlanStatsRxWepUnencrypted Counter32,
|
||
|
wlanStatsRxWepFailed Counter32,
|
||
|
wlanStatsRxDecapsulationFailed Counter32,
|
||
|
wlanStatsRxDiscardMgmt Counter32,
|
||
|
wlanStatsRxControl Counter32,
|
||
|
wlanStatsRxBeacon Counter32,
|
||
|
wlanStatsRxRateSetTooBig Counter32,
|
||
|
wlanStatsRxElemMissing Counter32,
|
||
|
wlanStatsRxElemTooBig Counter32,
|
||
|
wlanStatsRxElemTooSmall Counter32,
|
||
|
wlanStatsRxElemUnknown Counter32,
|
||
|
wlanStatsRxChannelMismatch Counter32,
|
||
|
wlanStatsRxDropped Counter32,
|
||
|
wlanStatsRxSsidMismatch Counter32,
|
||
|
wlanStatsRxAuthNotSupported Counter32,
|
||
|
wlanStatsRxAuthFailed Counter32,
|
||
|
wlanStatsRxAuthCM Counter32,
|
||
|
wlanStatsRxAssocWrongBssid Counter32,
|
||
|
wlanStatsRxAssocNoAuth Counter32,
|
||
|
wlanStatsRxAssocCapMismatch Counter32,
|
||
|
wlanStatsRxAssocNoRateMatch Counter32,
|
||
|
wlanStatsRxBadWpaIE Counter32,
|
||
|
wlanStatsRxDeauthenticate Counter32,
|
||
|
wlanStatsRxDisassociate Counter32,
|
||
|
wlanStatsRxUnknownSubtype Counter32,
|
||
|
wlanStatsRxFailedNoBuf Counter32,
|
||
|
wlanStatsRxBadAuthRequest Counter32,
|
||
|
wlanStatsRxUnAuthorized Counter32,
|
||
|
wlanStatsRxBadKeyId Counter32,
|
||
|
wlanStatsRxCCMPSeqViolation Counter32,
|
||
|
wlanStatsRxCCMPBadFormat Counter32,
|
||
|
wlanStatsRxCCMPFailedMIC Counter32,
|
||
|
wlanStatsRxTKIPSeqViolation Counter32,
|
||
|
wlanStatsRxTKIPBadFormat Counter32,
|
||
|
wlanStatsRxTKIPFailedMIC Counter32,
|
||
|
wlanStatsRxTKIPFailedICV Counter32,
|
||
|
wlanStatsRxDiscardACL Counter32,
|
||
|
wlanStatsTxFailedNoBuf Counter32,
|
||
|
wlanStatsTxFailedNoNode Counter32,
|
||
|
wlanStatsTxUnknownMgmt Counter32,
|
||
|
wlanStatsTxBadCipher Counter32,
|
||
|
wlanStatsTxNoDefKey Counter32,
|
||
|
wlanStatsTxFragmented Counter32,
|
||
|
wlanStatsTxFragmentsCreated Counter32,
|
||
|
wlanStatsActiveScans Counter32,
|
||
|
wlanStatsPassiveScans Counter32,
|
||
|
wlanStatsTimeoutInactivity Counter32,
|
||
|
wlanStatsCryptoNoMem Counter32,
|
||
|
wlanStatsSwCryptoTKIP Counter32,
|
||
|
wlanStatsSwCryptoTKIPEnMIC Counter32,
|
||
|
wlanStatsSwCryptoTKIPDeMIC Counter32,
|
||
|
wlanStatsCryptoTKIPCM Counter32,
|
||
|
wlanStatsSwCryptoCCMP Counter32,
|
||
|
wlanStatsSwCryptoWEP Counter32,
|
||
|
wlanStatsCryptoCipherKeyRejected Counter32,
|
||
|
wlanStatsCryptoNoKey Counter32,
|
||
|
wlanStatsCryptoDeleteKeyFailed Counter32,
|
||
|
wlanStatsCryptoUnknownCipher Counter32,
|
||
|
wlanStatsCryptoAttachFailed Counter32,
|
||
|
wlanStatsCryptoKeyFailed Counter32,
|
||
|
wlanStatsCryptoEnMICFailed Counter32,
|
||
|
wlanStatsIBSSCapMismatch Counter32,
|
||
|
wlanStatsUnassocStaPSPoll Counter32,
|
||
|
wlanStatsBadAidPSPoll Counter32,
|
||
|
wlanStatsEmptyPSPoll Counter32,
|
||
|
wlanStatsRxFFBadHdr Counter32,
|
||
|
wlanStatsRxFFTooShort Counter32,
|
||
|
wlanStatsRxFFSplitError Counter32,
|
||
|
wlanStatsRxFFDecap Counter32,
|
||
|
wlanStatsTxFFEncap Counter32,
|
||
|
wlanStatsRxBadBintval Counter32,
|
||
|
wlanStatsRxDemicFailed Counter32,
|
||
|
wlanStatsRxDefragFailed Counter32,
|
||
|
wlanStatsRxMgmt Counter32,
|
||
|
wlanStatsRxActionMgmt Counter32,
|
||
|
wlanStatsRxAMSDUTooShort Counter32,
|
||
|
wlanStatsRxAMSDUSplitError Counter32,
|
||
|
wlanStatsRxAMSDUDecap Counter32,
|
||
|
wlanStatsTxAMSDUEncap Counter32,
|
||
|
wlanStatsAMPDUBadBAR Counter32,
|
||
|
wlanStatsAMPDUOowBar Counter32,
|
||
|
wlanStatsAMPDUMovedBAR Counter32,
|
||
|
wlanStatsAMPDURxBAR Counter32,
|
||
|
wlanStatsAMPDURxOor Counter32,
|
||
|
wlanStatsAMPDURxCopied Counter32,
|
||
|
wlanStatsAMPDURxDropped Counter32,
|
||
|
wlanStatsTxDiscardBadState Counter32,
|
||
|
wlanStatsTxFailedNoAssoc Counter32,
|
||
|
wlanStatsTxClassifyFailed Counter32,
|
||
|
wlanStatsDwdsMcastDiscard Counter32,
|
||
|
wlanStatsHTAssocRejectNoHT Counter32,
|
||
|
wlanStatsHTAssocDowngrade Counter32,
|
||
|
wlanStatsHTAssocRateMismatch Counter32,
|
||
|
wlanStatsAMPDURxAge Counter32,
|
||
|
wlanStatsAMPDUMoved Counter32,
|
||
|
wlanStatsADDBADisabledReject Counter32,
|
||
|
wlanStatsADDBANoRequest Counter32,
|
||
|
wlanStatsADDBABadToken Counter32,
|
||
|
wlanStatsADDBABadPolicy Counter32,
|
||
|
wlanStatsAMPDUStopped Counter32,
|
||
|
wlanStatsAMPDUStopFailed Counter32,
|
||
|
wlanStatsAMPDURxReorder Counter32,
|
||
|
wlanStatsScansBackground Counter32,
|
||
|
wlanLastDeauthReason INTEGER,
|
||
|
wlanLastDissasocReason INTEGER,
|
||
|
wlanLastAuthFailReason INTEGER,
|
||
|
wlanStatsBeaconMissedEvents Counter32,
|
||
|
wlanStatsRxDiscardBadStates Counter32,
|
||
|
wlanStatsFFFlushed Counter32,
|
||
|
wlanStatsTxControlFrames Counter32,
|
||
|
wlanStatsAMPDURexmt Counter32,
|
||
|
wlanStatsAMPDURexmtFailed Counter32,
|
||
|
wlanStatsReset INTEGER
|
||
|
}
|
||
|
|
||
|
wlanStatsRxBadVersion OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that had bad version."
|
||
|
::= { wlanIfaceStatisticsEntry 1 }
|
||
|
|
||
|
wlanStatsRxTooShort OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were too short."
|
||
|
::= { wlanIfaceStatisticsEntry 2 }
|
||
|
|
||
|
wlanStatsRxWrongBssid OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with wrong BSSID."
|
||
|
::= { wlanIfaceStatisticsEntry 3 }
|
||
|
|
||
|
wlanStatsRxDiscardedDups OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received discarded duplicate frames by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 4 }
|
||
|
|
||
|
wlanStatsRxWrongDir OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received frames by this interface that were dropped
|
||
|
due to wrong direction."
|
||
|
::= { wlanIfaceStatisticsEntry 5 }
|
||
|
|
||
|
wlanStatsRxDiscardMcastEcho OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received multicast echo frames discarded by this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 6 }
|
||
|
|
||
|
wlanStatsRxDiscardNoAssoc OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were dropped
|
||
|
since no association existed with the sending station."
|
||
|
::= { wlanIfaceStatisticsEntry 7 }
|
||
|
|
||
|
wlanStatsRxWepNoPrivacy OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were dropped
|
||
|
since they contained WEP information and WEP privacy was off."
|
||
|
::= { wlanIfaceStatisticsEntry 8 }
|
||
|
|
||
|
wlanStatsRxWepUnencrypted OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were dropped
|
||
|
since they contained no WEP information and WEP privacy was on."
|
||
|
::= { wlanIfaceStatisticsEntry 9 }
|
||
|
|
||
|
wlanStatsRxWepFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were dropped
|
||
|
since processing of the WEP information contained in them failed."
|
||
|
::= { wlanIfaceStatisticsEntry 10 }
|
||
|
|
||
|
wlanStatsRxDecapsulationFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received frames that were discarded by this interface
|
||
|
due to decapsulation failure."
|
||
|
::= { wlanIfaceStatisticsEntry 11 }
|
||
|
|
||
|
wlanStatsRxDiscardMgmt OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received management frames discarded by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 12 }
|
||
|
|
||
|
wlanStatsRxControl OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of control frames received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 13 }
|
||
|
|
||
|
wlanStatsRxBeacon OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of beacon frames received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 14 }
|
||
|
|
||
|
wlanStatsRxRateSetTooBig OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with extended
|
||
|
supported rate element."
|
||
|
::= { wlanIfaceStatisticsEntry 15 }
|
||
|
|
||
|
wlanStatsRxElemMissing OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were missing
|
||
|
a required element."
|
||
|
::= { wlanIfaceStatisticsEntry 16 }
|
||
|
|
||
|
wlanStatsRxElemTooBig OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that contained an
|
||
|
information element whose size was too big."
|
||
|
::= { wlanIfaceStatisticsEntry 17 }
|
||
|
|
||
|
wlanStatsRxElemTooSmall OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that contained an
|
||
|
information element whose size was too small."
|
||
|
::= { wlanIfaceStatisticsEntry 18 }
|
||
|
|
||
|
wlanStatsRxElemUnknown OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that contained an
|
||
|
unknown information element."
|
||
|
::= { wlanIfaceStatisticsEntry 19 }
|
||
|
|
||
|
wlanStatsRxChannelMismatch OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface, that were discarded
|
||
|
since they were received on a channel different from the one indicated
|
||
|
in the DS params element id."
|
||
|
::= { wlanIfaceStatisticsEntry 20 }
|
||
|
|
||
|
wlanStatsRxDropped OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were dropped due
|
||
|
to unknown reason."
|
||
|
::= { wlanIfaceStatisticsEntry 21 }
|
||
|
|
||
|
wlanStatsRxSsidMismatch OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that had a bad SSID."
|
||
|
::= { wlanIfaceStatisticsEntry 22 }
|
||
|
|
||
|
wlanStatsRxAuthNotSupported OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that contained an
|
||
|
unknown authentication algorithm."
|
||
|
::= { wlanIfaceStatisticsEntry 23 }
|
||
|
|
||
|
wlanStatsRxAuthFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which the
|
||
|
authentication failed."
|
||
|
::= { wlanIfaceStatisticsEntry 24 }
|
||
|
|
||
|
wlanStatsRxAuthCM OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which the
|
||
|
authentication failed due to TKIP countermeasures enabled."
|
||
|
::= { wlanIfaceStatisticsEntry 25 }
|
||
|
|
||
|
wlanStatsRxAssocWrongBssid OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with association
|
||
|
request that had a bad BSSID."
|
||
|
::= { wlanIfaceStatisticsEntry 26 }
|
||
|
|
||
|
wlanStatsRxAssocNoAuth OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with association
|
||
|
request that came from unauthentication node."
|
||
|
::= { wlanIfaceStatisticsEntry 27 }
|
||
|
|
||
|
wlanStatsRxAssocCapMismatch OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with association
|
||
|
request that had bad capabilities set."
|
||
|
::= { wlanIfaceStatisticsEntry 28 }
|
||
|
|
||
|
wlanStatsRxAssocNoRateMatch OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with association
|
||
|
request that had unsupported rate set."
|
||
|
::= { wlanIfaceStatisticsEntry 29 }
|
||
|
|
||
|
wlanStatsRxBadWpaIE OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with association
|
||
|
request that had no or invalid WPA information element."
|
||
|
::= { wlanIfaceStatisticsEntry 30 }
|
||
|
|
||
|
wlanStatsRxDeauthenticate OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of deauthentication requests received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 31 }
|
||
|
|
||
|
wlanStatsRxDisassociate OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of deassociation requests received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 32 }
|
||
|
|
||
|
wlanStatsRxUnknownSubtype OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that had unknown
|
||
|
subtype."
|
||
|
::= { wlanIfaceStatisticsEntry 33 }
|
||
|
|
||
|
wlanStatsRxFailedNoBuf OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were dropped
|
||
|
due to lack of free buffers."
|
||
|
::= { wlanIfaceStatisticsEntry 34 }
|
||
|
|
||
|
wlanStatsRxBadAuthRequest OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which
|
||
|
authentication failed."
|
||
|
::= { wlanIfaceStatisticsEntry 35 }
|
||
|
|
||
|
wlanStatsRxUnAuthorized OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of non-PAE frames received by this interface prior to
|
||
|
authorization."
|
||
|
::= { wlanIfaceStatisticsEntry 36 }
|
||
|
|
||
|
wlanStatsRxBadKeyId OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface with bad key."
|
||
|
::= { wlanIfaceStatisticsEntry 37 }
|
||
|
|
||
|
wlanStatsRxCCMPSeqViolation OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that caused CCMP
|
||
|
sequence violation."
|
||
|
::= { wlanIfaceStatisticsEntry 38 }
|
||
|
|
||
|
wlanStatsRxCCMPBadFormat OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that had bad CCMP
|
||
|
format."
|
||
|
::= { wlanIfaceStatisticsEntry 39 }
|
||
|
|
||
|
wlanStatsRxCCMPFailedMIC OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames receivbed by this interface for which CCMP
|
||
|
decryption failed due to MIC mismatch."
|
||
|
::= { wlanIfaceStatisticsEntry 40 }
|
||
|
|
||
|
wlanStatsRxTKIPSeqViolation OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that caused TKIP
|
||
|
sequence violation.."
|
||
|
::= { wlanIfaceStatisticsEntry 41 }
|
||
|
|
||
|
wlanStatsRxTKIPBadFormat OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were missing
|
||
|
TKIP ExtIV."
|
||
|
::= { wlanIfaceStatisticsEntry 42 }
|
||
|
|
||
|
wlanStatsRxTKIPFailedMIC OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which TKIP
|
||
|
decryption failed due to MIC mismatch."
|
||
|
::= { wlanIfaceStatisticsEntry 43 }
|
||
|
|
||
|
wlanStatsRxTKIPFailedICV OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which TKIP
|
||
|
decryption failed due to ICV mismatch."
|
||
|
::= { wlanIfaceStatisticsEntry 44 }
|
||
|
|
||
|
wlanStatsRxDiscardACL OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface that were
|
||
|
disallowed by ACL."
|
||
|
::= { wlanIfaceStatisticsEntry 45 }
|
||
|
|
||
|
wlanStatsTxFailedNoBuf OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were not transmitted by this interface
|
||
|
due to lack of free buffers."
|
||
|
::= { wlanIfaceStatisticsEntry 46 }
|
||
|
|
||
|
wlanStatsTxFailedNoNode OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were queued for transmit on this interface
|
||
|
but were not sent since appropriate node for sending was not found."
|
||
|
::= { wlanIfaceStatisticsEntry 47 }
|
||
|
|
||
|
wlanStatsTxUnknownMgmt OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of unknown management frames transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 48 }
|
||
|
|
||
|
wlanStatsTxBadCipher OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were queued for transmit on this interface
|
||
|
but were not send since the specified key was not setup."
|
||
|
::= { wlanIfaceStatisticsEntry 49 }
|
||
|
|
||
|
wlanStatsTxNoDefKey OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were queued for transmit on this interface
|
||
|
but were not send since an appropriate key was not found."
|
||
|
::= { wlanIfaceStatisticsEntry 50 }
|
||
|
|
||
|
wlanStatsTxFragmented OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of fragmented frames transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 51 }
|
||
|
|
||
|
wlanStatsTxFragmentsCreated OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of created fragments transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 52 }
|
||
|
|
||
|
wlanStatsActiveScans OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of active scans performed by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 53 }
|
||
|
|
||
|
wlanStatsPassiveScans OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of passive scans performed by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 54 }
|
||
|
|
||
|
wlanStatsTimeoutInactivity OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times a station/node was dropped by this interface
|
||
|
due to inactivity timeout."
|
||
|
::= { wlanIfaceStatisticsEntry 55 }
|
||
|
|
||
|
wlanStatsCryptoNoMem OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number times attaching a crypto protocol to this interface
|
||
|
failed due to lack of memory."
|
||
|
::= { wlanIfaceStatisticsEntry 56 }
|
||
|
|
||
|
wlanStatsSwCryptoTKIP OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times TKIP encryption/decryption was handled in
|
||
|
software for frames received/transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 57 }
|
||
|
|
||
|
wlanStatsSwCryptoTKIPEnMIC OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times TKIP MIC was added in software to frames
|
||
|
transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 58 }
|
||
|
|
||
|
wlanStatsSwCryptoTKIPDeMIC OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times TKIP MIC was stripped in software from frames
|
||
|
received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 59 }
|
||
|
|
||
|
wlanStatsCryptoTKIPCM OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames discarded by this interface due to TKIP
|
||
|
counter measures."
|
||
|
::= { wlanIfaceStatisticsEntry 60 }
|
||
|
|
||
|
wlanStatsSwCryptoCCMP OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times CCMP encryption/decryption was handled in
|
||
|
software for frames received/transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 61 }
|
||
|
|
||
|
wlanStatsSwCryptoWEP OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times WEP encryption/decryption was handled in
|
||
|
software for frames received/transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 62 }
|
||
|
|
||
|
wlanStatsCryptoCipherKeyRejected OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times a key was rejected for this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 63 }
|
||
|
|
||
|
wlanStatsCryptoNoKey OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times key setup for this interface failed."
|
||
|
::= { wlanIfaceStatisticsEntry 64 }
|
||
|
|
||
|
wlanStatsCryptoDeleteKeyFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times key deletion from driver for this interface
|
||
|
failed."
|
||
|
::= { wlanIfaceStatisticsEntry 65 }
|
||
|
|
||
|
wlanStatsCryptoUnknownCipher OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times key setup for this interface failed due to
|
||
|
invalid cipher."
|
||
|
::= { wlanIfaceStatisticsEntry 66 }
|
||
|
|
||
|
wlanStatsCryptoAttachFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times attaching a cipher for this interface failed."
|
||
|
::= { wlanIfaceStatisticsEntry 67 }
|
||
|
|
||
|
wlanStatsCryptoKeyFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times setting a cipher in the driver for this
|
||
|
interface failed."
|
||
|
::= { wlanIfaceStatisticsEntry 68 }
|
||
|
|
||
|
wlanStatsCryptoEnMICFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were discarded by by this interface
|
||
|
due to failed enmic."
|
||
|
::= { wlanIfaceStatisticsEntry 69 }
|
||
|
|
||
|
wlanStatsIBSSCapMismatch OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times a BSSID change failed for an interface operating
|
||
|
in ad hoc mode due to capabilities mismatch."
|
||
|
::= { wlanIfaceStatisticsEntry 70 }
|
||
|
|
||
|
wlanStatsUnassocStaPSPoll OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of ps-poll frames from unassociated station received
|
||
|
by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 71 }
|
||
|
|
||
|
wlanStatsBadAidPSPoll OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of ps-poll frames with incorrect aid received by this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 72 }
|
||
|
|
||
|
wlanStatsEmptyPSPoll OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of empty ps-poll frames received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 73 }
|
||
|
|
||
|
wlanStatsRxFFBadHdr OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of fast frames with bad header received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 74 }
|
||
|
|
||
|
wlanStatsRxFFTooShort OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of fast frames received by this interface, for which
|
||
|
decapsulation failed."
|
||
|
::= { wlanIfaceStatisticsEntry 75 }
|
||
|
|
||
|
wlanStatsRxFFSplitError OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of fast frames received by this interface, for which
|
||
|
decapsulation failed during split."
|
||
|
::= { wlanIfaceStatisticsEntry 76 }
|
||
|
|
||
|
wlanStatsRxFFDecap OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of fast frames received by this interface, that were
|
||
|
successfully decapsulated."
|
||
|
::= { wlanIfaceStatisticsEntry 77 }
|
||
|
|
||
|
wlanStatsTxFFEncap OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of encapsulated fast frames transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 78 }
|
||
|
|
||
|
wlanStatsRxBadBintval OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames with bogus beacon interval received by this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 79 }
|
||
|
|
||
|
wlanStatsRxDemicFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which
|
||
|
stripping of the MIC failed."
|
||
|
::= { wlanIfaceStatisticsEntry 80 }
|
||
|
|
||
|
wlanStatsRxDefragFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received by this interface for which
|
||
|
defragmentation failed."
|
||
|
::= { wlanIfaceStatisticsEntry 81 }
|
||
|
|
||
|
wlanStatsRxMgmt OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of management frames received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 82 }
|
||
|
|
||
|
wlanStatsRxActionMgmt OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of action management frames received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 83 }
|
||
|
|
||
|
wlanStatsRxAMSDUTooShort OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MSDU frames received by this interface for which
|
||
|
decapsulaiton failed."
|
||
|
::= { wlanIfaceStatisticsEntry 84 }
|
||
|
|
||
|
wlanStatsRxAMSDUSplitError OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MSDU frames received by this interface for which
|
||
|
split failed."
|
||
|
::= { wlanIfaceStatisticsEntry 85 }
|
||
|
|
||
|
wlanStatsRxAMSDUDecap OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MSDU frames received by this interface which
|
||
|
were successfully decapsulaited."
|
||
|
::= { wlanIfaceStatisticsEntry 86 }
|
||
|
|
||
|
wlanStatsTxAMSDUEncap OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of encapsulated A-MSDU frames transmitted by this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 87 }
|
||
|
|
||
|
wlanStatsAMPDUBadBAR OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU frames that were dropped by this interface
|
||
|
source BAR frame processing was disabled."
|
||
|
::= { wlanIfaceStatisticsEntry 88 }
|
||
|
|
||
|
wlanStatsAMPDUOowBar OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU BAR before ADDBA frames received by this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 89 }
|
||
|
|
||
|
wlanStatsAMPDUMovedBAR OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times a BAR moved window occurred."
|
||
|
::= { wlanIfaceStatisticsEntry 90 }
|
||
|
|
||
|
wlanStatsAMPDURxBAR OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU BAR frames received by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 91 }
|
||
|
|
||
|
wlanStatsAMPDURxOor OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of out-of-order A-MPDU frames by received this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 92 }
|
||
|
|
||
|
wlanStatsAMPDURxCopied OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU frames by copied down this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 93 }
|
||
|
|
||
|
wlanStatsAMPDURxDropped OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU frames by dropped this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 94 }
|
||
|
|
||
|
wlanStatsTxDiscardBadState OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames queued for transmit on this interface that
|
||
|
were discarded due to interface state not ready for transmit."
|
||
|
::= { wlanIfaceStatisticsEntry 95 }
|
||
|
|
||
|
wlanStatsTxFailedNoAssoc OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames queued for transmit on this interface that
|
||
|
were discarded since the receiving station was not associated."
|
||
|
::= { wlanIfaceStatisticsEntry 96 }
|
||
|
|
||
|
wlanStatsTxClassifyFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames queued for transmit on this interface that
|
||
|
were discarded since their priority was not determined."
|
||
|
::= { wlanIfaceStatisticsEntry 97 }
|
||
|
|
||
|
wlanStatsDwdsMcastDiscard OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of multicast over DWDS frames discarded by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 98 }
|
||
|
|
||
|
wlanStatsHTAssocRejectNoHT OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of management frames received from a non-HT stations
|
||
|
that were rejected by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 99 }
|
||
|
|
||
|
wlanStatsHTAssocDowngrade OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times HT was disallowed for an association on
|
||
|
this interface due to WEP or TKIP requested."
|
||
|
::= { wlanIfaceStatisticsEntry 100 }
|
||
|
|
||
|
wlanStatsHTAssocRateMismatch OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times rate mismatch occurred during HT rate set
|
||
|
handling on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 101 }
|
||
|
|
||
|
wlanStatsAMPDURxAge OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU frames sent by this interface due to aging out."
|
||
|
::= { wlanIfaceStatisticsEntry 102 }
|
||
|
|
||
|
wlanStatsAMPDUMoved OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of time A-MPDU MSDU moved window occurred for this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 103 }
|
||
|
|
||
|
wlanStatsADDBADisabledReject OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received ADDBA frames that were discarded by this
|
||
|
interface since ADDBA was disabled."
|
||
|
::= { wlanIfaceStatisticsEntry 104 }
|
||
|
|
||
|
wlanStatsADDBANoRequest OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received ADDBA responses frames that were discarded
|
||
|
by this interface due to no pending ADDBA."
|
||
|
::= { wlanIfaceStatisticsEntry 105 }
|
||
|
|
||
|
wlanStatsADDBABadToken OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received ADDBA response frames that were discarded
|
||
|
by this interface since ADDBA response caused dialogtoken mismatch."
|
||
|
::= { wlanIfaceStatisticsEntry 106 }
|
||
|
|
||
|
wlanStatsADDBABadPolicy OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received ADDBA response frames that were discarded
|
||
|
by this interface since ADDBA response caused policy mismatch."
|
||
|
::= { wlanIfaceStatisticsEntry 107 }
|
||
|
|
||
|
wlanStatsAMPDUStopped OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times a A-MPDU stream stopped on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 108 }
|
||
|
|
||
|
wlanStatsAMPDUStopFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times a A-MPDU stream stop failed on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 109 }
|
||
|
|
||
|
wlanStatsAMPDURxReorder OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of received reordered A-MPDU frames on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 110 }
|
||
|
|
||
|
wlanStatsScansBackground OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of background scans started on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 111 }
|
||
|
|
||
|
wlanLastDeauthReason OBJECT-TYPE
|
||
|
SYNTAX WlanMgmtReasonCode
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last received deauthenticate reason on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 112 }
|
||
|
|
||
|
wlanLastDissasocReason OBJECT-TYPE
|
||
|
SYNTAX WlanMgmtReasonCode
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last received disassociate reason on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 113 }
|
||
|
|
||
|
wlanLastAuthFailReason OBJECT-TYPE
|
||
|
SYNTAX WlanMgmtReasonCode
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last received authentication failed reason on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 114 }
|
||
|
|
||
|
wlanStatsBeaconMissedEvents OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of beacon miss notification events on this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 115 }
|
||
|
|
||
|
wlanStatsRxDiscardBadStates OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames received on this interface that were discarded
|
||
|
due to interface state not ready for receive."
|
||
|
::= { wlanIfaceStatisticsEntry 116 }
|
||
|
|
||
|
wlanStatsFFFlushed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of fast frames flushed from the stage queue on this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 117 }
|
||
|
|
||
|
wlanStatsTxControlFrames OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of control frames transmitted by this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 118 }
|
||
|
|
||
|
wlanStatsAMPDURexmt OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU frames successfully retransmitted by this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 119 }
|
||
|
|
||
|
wlanStatsAMPDURexmtFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of A-MPDU frames for which retransmission failed on
|
||
|
this interface."
|
||
|
::= { wlanIfaceStatisticsEntry 120 }
|
||
|
|
||
|
wlanStatsReset OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
no-op(1),
|
||
|
clear(2)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object is used to reset the statistics on this
|
||
|
interface."
|
||
|
::= { wlanIfaceStatisticsEntry 121 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- The WEP Configuration Database for Wireless interfaces
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
wlanWepInterfaceTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanWepInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains WEP configuration for the wireless interfaces
|
||
|
on the managed system."
|
||
|
::= { begemotWlanWep 1 }
|
||
|
|
||
|
wlanWepInterfaceEntry OBJECT-TYPE
|
||
|
SYNTAX WlanWepInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"WEP Configuration for wireless interface."
|
||
|
INDEX { wlanIfaceName}
|
||
|
::= { wlanWepInterfaceTable 1 }
|
||
|
|
||
|
WlanWepInterfaceEntry ::= SEQUENCE {
|
||
|
wlanWepMode INTEGER,
|
||
|
wlanWepDefTxKey INTEGER
|
||
|
}
|
||
|
|
||
|
wlanWepMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
off(0),
|
||
|
on(1),
|
||
|
mixed(2)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The WEP mode set on the interface."
|
||
|
DEFVAL { off }
|
||
|
::= { wlanWepInterfaceEntry 1 }
|
||
|
|
||
|
wlanWepDefTxKey OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The index of the default WEP key for the interface."
|
||
|
::= { wlanWepInterfaceEntry 2 }
|
||
|
|
||
|
wlanWepKeyTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanWepKeyEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains the configured WEP keys for a virtual
|
||
|
wireless interface."
|
||
|
::= { begemotWlanWep 2 }
|
||
|
|
||
|
wlanWepKeyEntry OBJECT-TYPE
|
||
|
SYNTAX WlanWepKeyEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A configured WEP Key entry."
|
||
|
INDEX { wlanIfaceName, wlanWepKeyID }
|
||
|
::= { wlanWepKeyTable 1 }
|
||
|
|
||
|
WlanWepKeyEntry ::= SEQUENCE {
|
||
|
wlanWepKeyID INTEGER,
|
||
|
wlanWepKeyLength INTEGER,
|
||
|
wlanWepKeySet OCTET STRING,
|
||
|
wlanWepKeyHash OCTET STRING,
|
||
|
wlanWepKeyStatus RowStatus
|
||
|
}
|
||
|
|
||
|
wlanWepKeyID OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..4)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The WEP Key ID."
|
||
|
::= { wlanWepKeyEntry 1 }
|
||
|
|
||
|
wlanWepKeyLength OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The WEP Key length."
|
||
|
::= { wlanWepKeyEntry 2 }
|
||
|
|
||
|
wlanWepKeySet OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The WEP Key String to configure for this key. When GET is attempted
|
||
|
for this column, an empty Octet String is returned."
|
||
|
::= { wlanWepKeyEntry 3 }
|
||
|
|
||
|
wlanWepKeyHash OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The SHA256 hash produced of the WEP Key String."
|
||
|
::= { wlanWepKeyEntry 4 }
|
||
|
|
||
|
wlanWepKeyStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This object is used for creating/deleting WEP keys."
|
||
|
::= { wlanWepKeyEntry 5 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- The MAC Access Control Database for Wireless interfaces
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
wlanMACAccessControlTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMACAccessControlEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains Access Control configuration for wireless
|
||
|
interfaces operating as an access point."
|
||
|
::= { begemotWlanMACAccessControl 1 }
|
||
|
|
||
|
wlanMACAccessControlEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMACAccessControlEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The MAC Access Control configuration for a wireless interface
|
||
|
operating as an access point."
|
||
|
INDEX { wlanIfaceName}
|
||
|
::= { wlanMACAccessControlTable 1 }
|
||
|
|
||
|
WlanMACAccessControlEntry ::= SEQUENCE {
|
||
|
wlanMACAccessControlPolicy INTEGER,
|
||
|
wlanMACAccessControlNacl Counter32,
|
||
|
wlanMACAccessControlFlush INTEGER
|
||
|
}
|
||
|
|
||
|
wlanMACAccessControlPolicy OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
open(0),
|
||
|
allow(1),
|
||
|
deny(2),
|
||
|
radius(7)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the MAC Access Control policy
|
||
|
for this Host AP interface."
|
||
|
DEFVAL { open }
|
||
|
::= { wlanMACAccessControlEntry 1 }
|
||
|
|
||
|
wlanMACAccessControlNacl OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of active MAC Access Control Entries in the Database
|
||
|
for this Host AP interface."
|
||
|
::= { wlanMACAccessControlEntry 2 }
|
||
|
|
||
|
wlanMACAccessControlFlush OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
no-op(0),
|
||
|
flush(1)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This object is used to flush all entries from the MAC Access
|
||
|
Control Database for the specified virtual wireless interface."
|
||
|
::= { wlanMACAccessControlEntry 3 }
|
||
|
|
||
|
wlanMACAccessControlMACTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMACAccessControlMACEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains Access Control MAC for virtual wireless
|
||
|
interfaces operating in Host AP mode."
|
||
|
::= { begemotWlanMACAccessControl 2 }
|
||
|
|
||
|
wlanMACAccessControlMACEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMACAccessControlMACEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The MAC Access Control configuration database with MAC addresses
|
||
|
for a virtual wireless interface."
|
||
|
INDEX { wlanIfaceName, wlanMACAccessControlMAC }
|
||
|
::= { wlanMACAccessControlMACTable 1 }
|
||
|
|
||
|
WlanMACAccessControlMACEntry ::= SEQUENCE {
|
||
|
wlanMACAccessControlMAC MacAddress,
|
||
|
wlanMACAccessControlMACStatus RowStatus
|
||
|
}
|
||
|
|
||
|
wlanMACAccessControlMAC OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this object specifies the station's MAC to which
|
||
|
the Access Control policy will be applied."
|
||
|
::= { wlanMACAccessControlMACEntry 1 }
|
||
|
|
||
|
wlanMACAccessControlMACStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The object is used to add or delete MAC entries from the Access
|
||
|
Control Database for this interface operating in Host AP mode.
|
||
|
To add an entry the value of this object should be set to createAndGo,
|
||
|
a value of destroy will remove an existing entry. A GET on this object
|
||
|
will always return value active."
|
||
|
::= { wlanMACAccessControlMACEntry 2 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- The Mesh Routing Database for interfaces operating in mesh mode
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
wlanMeshRoutingConfig OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 1 }
|
||
|
|
||
|
wlanMeshInterface OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 2 }
|
||
|
|
||
|
wlanMeshRoute OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 3 }
|
||
|
|
||
|
wlanMeshStatistics OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 4 }
|
||
|
|
||
|
wlanMeshRouteProtocols OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 5 }
|
||
|
|
||
|
wlanMeshMaxRetries OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Maximum retries during peer link establishment for wireless mesh
|
||
|
routing operation."
|
||
|
DEFVAL { 2 }
|
||
|
::= { wlanMeshRoutingConfig 1 }
|
||
|
|
||
|
wlanMeshConfirmTimeout OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Confirm state timeout for wireless mesh routing operation."
|
||
|
DEFVAL { 40 }
|
||
|
::= { wlanMeshRoutingConfig 2 }
|
||
|
|
||
|
wlanMeshHoldingTimeout OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Holding state timeout for wireless mesh routing operation."
|
||
|
DEFVAL { 40 }
|
||
|
::= { wlanMeshRoutingConfig 3 }
|
||
|
|
||
|
wlanMeshRetryTimeout OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Retry timeout for wireless mesh routing operation."
|
||
|
DEFVAL { 40 }
|
||
|
::= { wlanMeshRoutingConfig 4 }
|
||
|
|
||
|
wlanMeshInterfaceTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMeshInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains information for wireless interfaces operating
|
||
|
as wireless mesh points."
|
||
|
::= { wlanMeshInterface 1 }
|
||
|
|
||
|
wlanMeshInterfaceEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMeshInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Wireless Mesh Routing information for an interface operating as
|
||
|
mesh point."
|
||
|
INDEX { wlanIfaceName }
|
||
|
::= { wlanMeshInterfaceTable 1 }
|
||
|
|
||
|
WlanMeshInterfaceEntry ::= SEQUENCE {
|
||
|
wlanMeshId OCTET STRING,
|
||
|
wlanMeshTTL INTEGER,
|
||
|
wlanMeshPeeringEnabled TruthValue,
|
||
|
wlanMeshForwardingEnabled TruthValue,
|
||
|
wlanMeshMetric INTEGER,
|
||
|
wlanMeshPath INTEGER,
|
||
|
wlanMeshRoutesFlush INTEGER
|
||
|
}
|
||
|
|
||
|
wlanMeshId OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING (SIZE(1..32))
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The desired Mesh Identifier for the interface."
|
||
|
::= { wlanMeshInterfaceEntry 1 }
|
||
|
|
||
|
wlanMeshTTL OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "hops"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of hops a packet may be forwarded before it is discarded."
|
||
|
DEFVAL { 31 }
|
||
|
::= { wlanMeshInterfaceEntry 2 }
|
||
|
|
||
|
wlanMeshPeeringEnabled OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enable or disable peering with neighbor mesh stations for this
|
||
|
interface."
|
||
|
DEFVAL { true }
|
||
|
::= { wlanMeshInterfaceEntry 3 }
|
||
|
|
||
|
wlanMeshForwardingEnabled OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enable or disable forwarding packets by this interface."
|
||
|
DEFVAL { true }
|
||
|
::= { wlanMeshInterfaceEntry 4 }
|
||
|
|
||
|
wlanMeshMetric OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
unknown(0),
|
||
|
airtime(1)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The link metric protocol used by the interface."
|
||
|
DEFVAL { airtime }
|
||
|
::= { wlanMeshInterfaceEntry 5 }
|
||
|
|
||
|
wlanMeshPath OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
unknown(0),
|
||
|
hwmp(1)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The path selection protocol used by the interface."
|
||
|
DEFVAL { hwmp }
|
||
|
::= { wlanMeshInterfaceEntry 6 }
|
||
|
|
||
|
wlanMeshRoutesFlush OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
no-op(0),
|
||
|
flush(1)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This object is used to flush all mesh route entries from the mesh
|
||
|
routing table for the specified interface."
|
||
|
::= { wlanMeshInterfaceEntry 7 }
|
||
|
|
||
|
wlanMeshNeighborTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMeshNeighborEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains information for the neighbors of wireless
|
||
|
interfaces operating in mesh mode."
|
||
|
::= { wlanMeshInterface 2 }
|
||
|
|
||
|
wlanMeshNeighborEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMeshNeighborEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Information for all neighbors of a wireless interface operating as
|
||
|
a mesh point."
|
||
|
INDEX { wlanIfaceName, wlanMeshNeighborAddress }
|
||
|
::= { wlanMeshNeighborTable 1 }
|
||
|
|
||
|
WlanMeshNeighborEntry ::= SEQUENCE {
|
||
|
wlanMeshNeighborAddress MacAddress,
|
||
|
wlanMeshNeighborFrequency INTEGER,
|
||
|
wlanMeshNeighborLocalId INTEGER,
|
||
|
wlanMeshNeighborPeerId INTEGER,
|
||
|
wlanMeshNeighborPeerState INTEGER,
|
||
|
wlanMeshNeighborCurrentTXRate INTEGER,
|
||
|
wlanMeshNeighborRxSignalStrength INTEGER,
|
||
|
wlanMeshNeighborIdleTimer INTEGER,
|
||
|
wlanMeshNeighborTxSequenceNo INTEGER,
|
||
|
wlanMeshNeighborRxSequenceNo INTEGER
|
||
|
}
|
||
|
|
||
|
wlanMeshNeighborAddress OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The Ethernet address of this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 1 }
|
||
|
|
||
|
wlanMeshNeighborFrequency OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The operating frequency for the link with this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 2 }
|
||
|
|
||
|
wlanMeshNeighborLocalId OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The local mesh id for this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 3 }
|
||
|
|
||
|
wlanMeshNeighborPeerId OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The mesh peer id of this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 4 }
|
||
|
|
||
|
wlanMeshNeighborPeerState OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
idle(0),
|
||
|
openTx(1),
|
||
|
openRx(2),
|
||
|
confirmRx(3),
|
||
|
established(4),
|
||
|
closing(5)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The current link state for this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 5 }
|
||
|
|
||
|
wlanMeshNeighborCurrentTXRate OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The current transmit rate for this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 6 }
|
||
|
|
||
|
wlanMeshNeighborRxSignalStrength OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The average receive signal strength for this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 7 }
|
||
|
|
||
|
wlanMeshNeighborIdleTimer OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The value of this neighbor's inactivity timer."
|
||
|
::= { wlanMeshNeighborEntry 8 }
|
||
|
|
||
|
wlanMeshNeighborTxSequenceNo OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last sequence number transmitted to this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 9 }
|
||
|
|
||
|
wlanMeshNeighborRxSequenceNo OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last sequence number received from this neighbor."
|
||
|
::= { wlanMeshNeighborEntry 10 }
|
||
|
|
||
|
wlanMeshRouteTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMeshRouteEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains the mesh routing table for interfaces operating
|
||
|
as mesh points, used for forwarding packets on a mesh network."
|
||
|
::= { wlanMeshRoute 1 }
|
||
|
|
||
|
wlanMeshRouteEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMeshRouteEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Wireless Mesh Routing Table entries for virtual wireless interfaces."
|
||
|
INDEX { wlanIfaceName, wlanMeshRouteDestination }
|
||
|
::= { wlanMeshRouteTable 1 }
|
||
|
|
||
|
WlanMeshRouteEntry ::= SEQUENCE {
|
||
|
wlanMeshRouteDestination MacAddress,
|
||
|
wlanMeshRouteNextHop MacAddress,
|
||
|
wlanMeshRouteHops INTEGER,
|
||
|
wlanMeshRouteMetric Unsigned32,
|
||
|
wlanMeshRouteLifeTime Unsigned32,
|
||
|
wlanMeshRouteLastMseq Unsigned32,
|
||
|
wlanMeshRouteFlags BITS,
|
||
|
wlanMeshRouteStatus RowStatus
|
||
|
}
|
||
|
|
||
|
wlanMeshRouteDestination OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The mesh route entry's destination address."
|
||
|
::= { wlanMeshRouteEntry 1 }
|
||
|
|
||
|
wlanMeshRouteNextHop OBJECT-TYPE
|
||
|
SYNTAX MacAddress
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The mesh route entry's next hop address."
|
||
|
::= { wlanMeshRouteEntry 2 }
|
||
|
|
||
|
wlanMeshRouteHops OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of hops for this mesh route entry."
|
||
|
::= { wlanMeshRouteEntry 3 }
|
||
|
|
||
|
wlanMeshRouteMetric OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The metric of this mesh route entry."
|
||
|
::= { wlanMeshRouteEntry 4 }
|
||
|
|
||
|
wlanMeshRouteLifeTime OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The life time of this mesh route entry."
|
||
|
::= { wlanMeshRouteEntry 5 }
|
||
|
|
||
|
wlanMeshRouteLastMseq OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The last sequence number seen from this destination."
|
||
|
::= { wlanMeshRouteEntry 6 }
|
||
|
|
||
|
wlanMeshRouteFlags OBJECT-TYPE
|
||
|
SYNTAX BITS {
|
||
|
valid(1),
|
||
|
proxy(2)
|
||
|
}
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The Mesh Route entry's flags."
|
||
|
::= { wlanMeshRouteEntry 7 }
|
||
|
|
||
|
wlanMeshRouteStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The object is used to add or delete entries from the mesh routing
|
||
|
table for the virtual wireless interface."
|
||
|
::= { wlanMeshRouteEntry 8 }
|
||
|
|
||
|
wlanMeshStatsTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMeshStatsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains summary statistics for each virtual wireless
|
||
|
interface operating as mesh point."
|
||
|
::= { wlanMeshStatistics 1 }
|
||
|
|
||
|
wlanMeshStatsEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMeshStatsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A list of statistics for each virtual wireless interface operating
|
||
|
as mesh point."
|
||
|
INDEX { wlanIfaceName }
|
||
|
::= { wlanMeshStatsTable 1 }
|
||
|
|
||
|
WlanMeshStatsEntry ::= SEQUENCE {
|
||
|
wlanMeshDroppedBadSta Counter32,
|
||
|
wlanMeshDroppedNoLink Counter32,
|
||
|
wlanMeshNoFwdTtl Counter32,
|
||
|
wlanMeshNoFwdBuf Counter32,
|
||
|
wlanMeshNoFwdTooShort Counter32,
|
||
|
wlanMeshNoFwdDisabled Counter32,
|
||
|
wlanMeshNoFwdPathUnknown Counter32,
|
||
|
wlanMeshDroppedBadAE Counter32,
|
||
|
wlanMeshRouteAddFailed Counter32,
|
||
|
wlanMeshDroppedNoProxy Counter32,
|
||
|
wlanMeshDroppedMisaligned Counter32
|
||
|
}
|
||
|
|
||
|
wlanMeshDroppedBadSta OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames dropped by this interface since they were
|
||
|
received from a non-mesh station."
|
||
|
::= { wlanMeshStatsEntry 1 }
|
||
|
|
||
|
wlanMeshDroppedNoLink OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames dropped by this interface since no link had
|
||
|
been established."
|
||
|
::= { wlanMeshStatsEntry 2 }
|
||
|
|
||
|
wlanMeshNoFwdTtl OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were not forwarded by this interface
|
||
|
because of a zero TTL."
|
||
|
::= { wlanMeshStatsEntry 3 }
|
||
|
|
||
|
wlanMeshNoFwdBuf OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were not forwarded by this interface
|
||
|
due to lack of free buffers."
|
||
|
::= { wlanMeshStatsEntry 4 }
|
||
|
|
||
|
wlanMeshNoFwdTooShort OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were not forwarded by this interface
|
||
|
due to missing headers."
|
||
|
::= { wlanMeshStatsEntry 5 }
|
||
|
|
||
|
wlanMeshNoFwdDisabled OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were not forwarded by this interface
|
||
|
since forwarding was disabled."
|
||
|
::= { wlanMeshStatsEntry 6 }
|
||
|
|
||
|
wlanMeshNoFwdPathUnknown OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were not forwarded by this interface
|
||
|
since the path was unknown."
|
||
|
::= { wlanMeshStatsEntry 7 }
|
||
|
|
||
|
wlanMeshDroppedBadAE OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were dropped by this interface since
|
||
|
the AE was invalid."
|
||
|
::= { wlanMeshStatsEntry 8 }
|
||
|
|
||
|
wlanMeshRouteAddFailed OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of times an addition of a route to the mesh routing
|
||
|
table for this interface failed."
|
||
|
::= { wlanMeshStatsEntry 9 }
|
||
|
|
||
|
wlanMeshDroppedNoProxy OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were dropped by this interface since
|
||
|
proxying was not enabled on the interface."
|
||
|
::= { wlanMeshStatsEntry 10 }
|
||
|
|
||
|
wlanMeshDroppedMisaligned OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of frames that were dropped by this interface due to
|
||
|
bad alignment."
|
||
|
::= { wlanMeshStatsEntry 11 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- Subtrees containing data for each supported mesh routing protocol.
|
||
|
-- ---------------------------------------------------------- --
|
||
|
|
||
|
wlanMeshProtoHWMP OBJECT IDENTIFIER ::= { wlanMeshRouteProtocols 1 }
|
||
|
|
||
|
-- ---------------------------------------------------------- --
|
||
|
-- Hybrid Wireless Mesh Protocol database.
|
||
|
-- ---------------------------------------------------------- --
|
||
|
wlanMeshHWMPConfig OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 1 }
|
||
|
|
||
|
wlanMeshHWMPInterface OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 2 }
|
||
|
|
||
|
wlanMeshHWMPStatistics OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 3 }
|
||
|
|
||
|
wlanHWMPRouteInactiveTimeout OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The HWMP Route inactivity timeout."
|
||
|
DEFVAL { 5000 }
|
||
|
::= { wlanMeshHWMPConfig 1 }
|
||
|
|
||
|
wlanHWMPRootAnnounceInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The HWMP Root Announcement interval."
|
||
|
DEFVAL { 1000 }
|
||
|
::= { wlanMeshHWMPConfig 2 }
|
||
|
|
||
|
wlanHWMPRootInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The HWMP Root interval."
|
||
|
DEFVAL { 2000 }
|
||
|
::= { wlanMeshHWMPConfig 3 }
|
||
|
|
||
|
wlanHWMPRootTimeout OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The root PREQ timeout."
|
||
|
DEFVAL { 5000 }
|
||
|
::= { wlanMeshHWMPConfig 4 }
|
||
|
|
||
|
wlanHWMPPathLifetime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
UNITS "milliseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The HWMP path entry lifetime."
|
||
|
DEFVAL { 500 }
|
||
|
::= { wlanMeshHWMPConfig 5 }
|
||
|
|
||
|
wlanHWMPReplyForwardBit OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A non-zero value for this object specifies that RF bit shall be
|
||
|
set on generated PREQs."
|
||
|
DEFVAL { 1 }
|
||
|
::= { wlanMeshHWMPConfig 6 }
|
||
|
|
||
|
wlanHWMPTargetOnlyBit OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A non-zero value for this object specifies that TO bit shall be
|
||
|
set on generated PREQs."
|
||
|
DEFVAL { 0 }
|
||
|
::= { wlanMeshHWMPConfig 7 }
|
||
|
|
||
|
wlanHWMPInterfaceTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanHWMPInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains information for wireless interfaces
|
||
|
operating in mesh mode."
|
||
|
::= { wlanMeshHWMPInterface 1 }
|
||
|
|
||
|
wlanHWMPInterfaceEntry OBJECT-TYPE
|
||
|
SYNTAX WlanHWMPInterfaceEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Wireless Mesh Routing HWMP information for a wireless interface."
|
||
|
INDEX { wlanIfaceName }
|
||
|
::= { wlanHWMPInterfaceTable 1 }
|
||
|
|
||
|
WlanHWMPInterfaceEntry ::= SEQUENCE {
|
||
|
wlanHWMPRootMode INTEGER,
|
||
|
wlanHWMPMaxHops INTEGER
|
||
|
}
|
||
|
|
||
|
wlanHWMPRootMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disabled(1),
|
||
|
normal(2),
|
||
|
proactive(3),
|
||
|
rann(4)
|
||
|
}
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This object is used to configure whether the interface will operate
|
||
|
as root node and specify root node mode."
|
||
|
DEFVAL { disabled }
|
||
|
::= { wlanHWMPInterfaceEntry 1 }
|
||
|
|
||
|
wlanHWMPMaxHops OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum number of hops allowed on an HMWP path for this interface."
|
||
|
DEFVAL { 31 }
|
||
|
::= { wlanHWMPInterfaceEntry 2 }
|
||
|
|
||
|
wlanMeshHWMPStatsTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF WlanMeshHWMPStatsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A table that contains summary statistics for HWMP operation on an
|
||
|
interface operating as mesh point."
|
||
|
::= { wlanMeshHWMPStatistics 1 }
|
||
|
|
||
|
wlanMeshHWMPStatsEntry OBJECT-TYPE
|
||
|
SYNTAX WlanMeshHWMPStatsEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A list of HWMP statistics for each wlan interface operating as HWMP
|
||
|
mesh point."
|
||
|
INDEX { wlanIfaceName }
|
||
|
::= { wlanMeshHWMPStatsTable 1 }
|
||
|
|
||
|
WlanMeshHWMPStatsEntry ::= SEQUENCE {
|
||
|
wlanMeshHWMPWrongSeqNo Counter32,
|
||
|
wlanMeshHWMPTxRootPREQ Counter32,
|
||
|
wlanMeshHWMPTxRootRANN Counter32,
|
||
|
wlanMeshHWMPProxy Counter32
|
||
|
}
|
||
|
|
||
|
wlanMeshHWMPWrongSeqNo OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of HWMP frames with wrong sequence number received by
|
||
|
this interface."
|
||
|
::= { wlanMeshHWMPStatsEntry 1 }
|
||
|
|
||
|
wlanMeshHWMPTxRootPREQ OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of HWMP Root PREQ frames sent by this interface."
|
||
|
::= { wlanMeshHWMPStatsEntry 2 }
|
||
|
|
||
|
wlanMeshHWMPTxRootRANN OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of HWMP Root RANN frames sent by this interface."
|
||
|
::= { wlanMeshHWMPStatsEntry 3 }
|
||
|
|
||
|
wlanMeshHWMPProxy OBJECT-TYPE
|
||
|
SYNTAX Counter32
|
||
|
UNITS "frames"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of HWMP PREP frames discarded by this interface due to
|
||
|
the HWMP route being marked as proxy."
|
||
|
::= { wlanMeshHWMPStatsEntry 4 }
|
||
|
|
||
|
END
|