1170 lines
38 KiB
Plaintext
1170 lines
38 KiB
Plaintext
--
|
|
-- Copyright (C) 2006 Shteryana Shopova <syrinx@FreeBSD.org>
|
|
-- All rights reserved.
|
|
--
|
|
-- Redistribution and use in source and binary forms, with or without
|
|
-- modification, are permitted provided that the following conditions
|
|
-- are met:
|
|
-- 1. Redistributions of source code must retain the above copyright
|
|
-- notice, this list of conditions and the following disclaimer.
|
|
-- 2. Redistributions in binary form must reproduce the above copyright
|
|
-- notice, this list of conditions and the following disclaimer in the
|
|
-- documentation and/or other materials provided with the distribution.
|
|
--
|
|
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
-- SUCH DAMAGE.
|
|
--
|
|
-- $FreeBSD$
|
|
--
|
|
|
|
BEGEMOT-BRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Counter32, Integer32, TimeTicks, mib-2
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus
|
|
FROM SNMPv2-TC
|
|
BridgeId, Timeout
|
|
FROM BRIDGE-MIB
|
|
InterfaceIndex FROM IF-MIB
|
|
begemot
|
|
FROM BEGEMOT-MIB;
|
|
|
|
begemotBridge MODULE-IDENTITY
|
|
LAST-UPDATED "201612170000Z"
|
|
ORGANIZATION "Sofia University St. Kliment Ohridski"
|
|
CONTACT-INFO
|
|
" Shteryana Shopova
|
|
|
|
Postal: Faculty of Mathematics and Informatics
|
|
5 James Bourchier Blvd.
|
|
1164 Sofia
|
|
Bulgaria
|
|
|
|
Fax: +359 2 687 180
|
|
|
|
E-Mail: syrinx@FreeBSD.org"
|
|
DESCRIPTION
|
|
"The Begemot MIB for managing bridge interfaces."
|
|
REVISION "201612170000Z"
|
|
DESCRIPTION
|
|
"Address some minor typos and grammar mistakes."
|
|
REVISION "200708060000Z"
|
|
DESCRIPTION
|
|
"Third revision adds begemotBridgeBasePortPrivate
|
|
object."
|
|
REVISION "200611210000Z"
|
|
DESCRIPTION
|
|
"Second revision adds support for monitoring RSTP
|
|
specific variables."
|
|
REVISION "200607270000Z"
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { begemot 205 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
BridgeIfName ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "16a"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of a bridge interface."
|
|
SYNTAX OCTET STRING (SIZE(1..16))
|
|
|
|
BridgeIfNameOrEmpty ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "16a"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of a bridge interface."
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
|
|
BridgePortId ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1x.1x"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port identifier that contains a bridge port's STP priority
|
|
in the first octet and the port number in the second octet."
|
|
SYNTAX OCTET STRING (SIZE(2))
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- subtrees in the Begemot Bridge MIB
|
|
-- ---------------------------------------------------------- --
|
|
begemotBridgeNotifications OBJECT IDENTIFIER ::= { begemotBridge 0 }
|
|
|
|
begemotBridgeBase OBJECT IDENTIFIER ::= { begemotBridge 1 }
|
|
|
|
begemotBridgeStp OBJECT IDENTIFIER ::= { begemotBridge 2 }
|
|
|
|
begemotBridgeTp OBJECT IDENTIFIER ::= { begemotBridge 3 }
|
|
|
|
begemotBridgePf OBJECT IDENTIFIER ::= { begemotBridge 4 }
|
|
|
|
begemotBridgeConfigObjects OBJECT IDENTIFIER ::= { begemotBridge 5 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the base Bridge interface table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeBaseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeBaseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains generic information for each
|
|
bridge interface on the managed device."
|
|
::= { begemotBridgeBase 1 }
|
|
|
|
begemotBridgeBaseEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeBaseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for the bridge interfaces on
|
|
the managed device."
|
|
INDEX { begemotBridgeBaseName }
|
|
::= { begemotBridgeBaseTable 1 }
|
|
|
|
BegemotBridgeBaseEntry ::= SEQUENCE {
|
|
begemotBridgeBaseName BridgeIfName,
|
|
begemotBridgeBaseAddress MacAddress,
|
|
begemotBridgeBaseNumPorts Integer32,
|
|
begemotBridgeBaseType INTEGER,
|
|
begemotBridgeBaseStatus RowStatus
|
|
}
|
|
|
|
begemotBridgeBaseName OBJECT-TYPE
|
|
SYNTAX BridgeIfName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the bridge interface for which this
|
|
entry contains management information."
|
|
::= { begemotBridgeBaseEntry 1 }
|
|
|
|
begemotBridgeBaseAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the bridge interface."
|
|
::= { begemotBridgeBaseEntry 2 }
|
|
|
|
begemotBridgeBaseNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports, members of this bridge."
|
|
::= { begemotBridgeBaseEntry 3 }
|
|
|
|
begemotBridgeBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
transparent-only(2),
|
|
sourceroute-only(3),
|
|
srt(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates what type of bridging this bridge can
|
|
perform."
|
|
::= { begemotBridgeBaseEntry 4 }
|
|
|
|
begemotBridgeBaseStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to create/destroy bridge interfaces on the
|
|
managed device."
|
|
::= { begemotBridgeBaseEntry 5 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the base Bridge ports table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeBasePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeBasePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing generic information about ports,
|
|
members of each bridge interface."
|
|
::= { begemotBridgeBase 2 }
|
|
|
|
begemotBridgeBasePortEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeBasePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information about a specific port, member of
|
|
a bridge interface."
|
|
INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
|
|
::= { begemotBridgeBasePortTable 1 }
|
|
|
|
BegemotBridgeBasePortEntry ::= SEQUENCE {
|
|
begemotBridgeBasePort Integer32,
|
|
begemotBridgeBasePortIfIndex InterfaceIndex,
|
|
begemotBridgeBaseSpanEnabled INTEGER,
|
|
begemotBridgeBasePortDelayExceededDiscards Counter32,
|
|
begemotBridgeBasePortMtuExceededDiscards Counter32,
|
|
begemotBridgeBasePortStatus RowStatus,
|
|
begemotBridgeBasePortPrivate TruthValue
|
|
}
|
|
|
|
begemotBridgeBasePort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system interface index of the interface corresponding
|
|
to this port."
|
|
::= { begemotBridgeBasePortEntry 1 }
|
|
|
|
begemotBridgeBasePortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the instance of the ifIndex object,
|
|
defined in IF-MIB, for the interface corresponding
|
|
to this port."
|
|
::= { begemotBridgeBasePortEntry 2 }
|
|
|
|
begemotBridgeBaseSpanEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this objects reflects whether the port
|
|
is a span port on the specified bridge interface."
|
|
::= { begemotBridgeBasePortEntry 3 }
|
|
|
|
begemotBridgeBasePortDelayExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to excessive transit delay through the bridge."
|
|
::= { begemotBridgeBasePortEntry 4 }
|
|
|
|
begemotBridgeBasePortMtuExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to an excessive size."
|
|
::= { begemotBridgeBasePortEntry 5 }
|
|
|
|
begemotBridgeBasePortStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to control addition of member ports to or
|
|
removal of member ports from a specified bridge."
|
|
::= { begemotBridgeBasePortEntry 6 }
|
|
|
|
begemotBridgeBasePortPrivate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this objects reflects whether the port
|
|
has a PRIVATE flag set. A port with this flags set
|
|
can only communicate with ports not having the
|
|
PRIVATE flag set."
|
|
::= { begemotBridgeBasePortEntry 7 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the Bridge interface STP table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeStpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains Spanning Tree Protocol information
|
|
for each bridge interface on the managed device."
|
|
::= { begemotBridgeStp 1 }
|
|
|
|
begemotBridgeStpEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeStpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information about the Spanning Tree Protocol
|
|
operation on a bridge interface."
|
|
AUGMENTS { begemotBridgeBaseEntry }
|
|
::= { begemotBridgeStpTable 1 }
|
|
|
|
BegemotBridgeStpEntry ::= SEQUENCE {
|
|
begemotBridgeStpProtocolSpecification INTEGER,
|
|
begemotBridgeStpPriority Integer32,
|
|
begemotBridgeStpTimeSinceTopologyChange TimeTicks,
|
|
begemotBridgeStpTopChanges Counter32,
|
|
begemotBridgeStpDesignatedRoot BridgeId,
|
|
begemotBridgeStpRootCost Integer32,
|
|
begemotBridgeStpRootPort Integer32,
|
|
begemotBridgeStpMaxAge Timeout,
|
|
begemotBridgeStpHelloTime Timeout,
|
|
begemotBridgeStpHoldTime Integer32,
|
|
begemotBridgeStpForwardDelay Timeout,
|
|
begemotBridgeStpBridgeMaxAge Timeout,
|
|
begemotBridgeStpBridgeHelloTime Timeout,
|
|
begemotBridgeStpBridgeForwardDelay Timeout,
|
|
begemotBridgeStpVersion INTEGER,
|
|
begemotBridgeStpTxHoldCount Integer32
|
|
}
|
|
|
|
begemotBridgeStpProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Spanning Tree Protocol version being run on the
|
|
bridge interface. The value 'decLb100(2)' indicates the
|
|
DEC LANbridge 100 Spanning Tree protocol, 'ieee8021d(3)'
|
|
indicates the bridge is running IEEE 802.1D STP
|
|
implementation."
|
|
::= { begemotBridgeStpEntry 1 }
|
|
|
|
begemotBridgeStpPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value of the bridge interface forming the
|
|
first two octets of the bridge identifier. Acceptable
|
|
values are 0-61440, in steps of 4096."
|
|
::= { begemotBridgeStpEntry 2 }
|
|
|
|
begemotBridgeStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundreds of a second) since a topology change
|
|
was last detected by this bridge."
|
|
::= { begemotBridgeStpEntry 3 }
|
|
|
|
begemotBridgeStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a topology change was detected by the
|
|
bridge interface since the management entity was initialized
|
|
or reset."
|
|
::= { begemotBridgeStpEntry 4 }
|
|
|
|
begemotBridgeStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge identifier of the root of the spanning tree as
|
|
calculated by the Spanning Tree Protocol."
|
|
::= { begemotBridgeStpEntry 5 }
|
|
|
|
begemotBridgeStpRootCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of the path from this bridge to the root bridge."
|
|
::= { begemotBridgeStpEntry 6 }
|
|
|
|
begemotBridgeStpRootPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port that offers the lowest
|
|
cost path from this bridge to the root bridge of
|
|
the spanning tree. If this bridge is the root bridge,
|
|
this object shall have a value of zero."
|
|
::= { begemotBridgeStpEntry 7 }
|
|
|
|
begemotBridgeStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol information
|
|
received from the network on any port, before that
|
|
information is discarded. This is the actual value that
|
|
the bridge is currently using."
|
|
::= { begemotBridgeStpEntry 8 }
|
|
|
|
begemotBridgeStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time between transmission of
|
|
Configuration BPDUs by this bridge on any port,
|
|
when it is the root of the spanning tree or is
|
|
trying to become so. This is the actual value that
|
|
this bridge is currently using."
|
|
::= { begemotBridgeStpEntry 9 }
|
|
|
|
begemotBridgeStpHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value determines the interval length
|
|
during which no more than two Configuration BPDUs
|
|
shall be transmitted by this node, in units of
|
|
hundredths of a second."
|
|
::= { begemotBridgeStpEntry 10 }
|
|
|
|
begemotBridgeStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, measured in units of hundredths of a second
|
|
determines how long a port will stay consecutively in the
|
|
Listening and Learning states before transitioning to
|
|
Forwarding state.
|
|
This is the actual value currently used by the bridge
|
|
as opposed to begemotBridgeStpBridgeForwardDelay, which
|
|
is the value this and all bridges participating in the
|
|
spanning tree were to use, if this was the root bridge."
|
|
::= { begemotBridgeStpEntry 11 }
|
|
|
|
begemotBridgeStpBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout (600..4000)
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges participating in the
|
|
spanning tree would use for MaxAge if this bridge
|
|
was the root of the spanning tree."
|
|
::= { begemotBridgeStpEntry 12 }
|
|
|
|
begemotBridgeStpBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout (100..1000)
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges participating in the
|
|
spanning tree would use for HelloTime if this
|
|
bridge was the root of the spanning tree."
|
|
::= { begemotBridgeStpEntry 13 }
|
|
|
|
begemotBridgeStpBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout (400..3000)
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges participating in the
|
|
spanning tree would use for ForwardDelay if this
|
|
bridge was the root of the spanning tree."
|
|
::= { begemotBridgeStpEntry 14 }
|
|
|
|
begemotBridgeStpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stpCompatible(0),
|
|
rstp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of Spanning Tree Protocol the bridge is
|
|
currently running. The value 'stpCompatible(0)'
|
|
indicates the Spanning Tree Protocol specified in
|
|
IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
|
|
Spanning Tree Protocol specified in IEEE 802.1w and
|
|
clause 17 of 802.1D-2004. The values are directly from
|
|
the IEEE standard. New values may be defined as future
|
|
versions of the protocol become available.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
DEFVAL { rstp }
|
|
::= { begemotBridgeStpEntry 15 }
|
|
|
|
begemotBridgeStpTxHoldCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value used by the Port Transmit state machine to limit
|
|
the maximum transmission rate of BPDUs on the bridge interface.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
DEFVAL { 3 }
|
|
::= { begemotBridgeStpEntry 16 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the Bridge STP ports table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing Spanning Tree Protocol information
|
|
about the members of each bridge interface."
|
|
::= { begemotBridgeStp 2 }
|
|
|
|
begemotBridgeStpPortEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Spanning Tree Protocol information about
|
|
a specific member of a bridge interface."
|
|
INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
|
|
::= { begemotBridgeStpPortTable 1 }
|
|
|
|
BegemotBridgeStpPortEntry ::= SEQUENCE {
|
|
begemotBridgeStpPort Integer32,
|
|
begemotBridgeStpPortPriority Integer32,
|
|
begemotBridgeStpPortState INTEGER,
|
|
begemotBridgeStpPortEnable INTEGER,
|
|
begemotBridgeStpPortPathCost Integer32,
|
|
begemotBridgeStpPortDesignatedRoot BridgeId,
|
|
begemotBridgeStpPortDesignatedCost Integer32,
|
|
begemotBridgeStpPortDesignatedBridge BridgeId,
|
|
begemotBridgeStpPortDesignatedPort BridgePortId,
|
|
begemotBridgeStpPortForwardTransitions Counter32
|
|
}
|
|
|
|
begemotBridgeStpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system interface index of the interface corresponding
|
|
to this port, for which the management entity has Spanning
|
|
Tree Protocol information."
|
|
::= { begemotBridgeStpPortEntry 1 }
|
|
|
|
begemotBridgeStpPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The STP priority of this port that is contained in the first
|
|
octet of its Port Identifier. The second octet contains the
|
|
value of begemotBridgeStpPort."
|
|
::= { begemotBridgeStpPortEntry 2 }
|
|
|
|
begemotBridgeStpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the port as defined by the operation
|
|
of the Spanning Tree Protocol. If the Spanning Tree Protocol
|
|
is administratively disabled on the port, this object shall
|
|
have value disabled(1). A value of broken(6) does not correspond
|
|
to any legal state of a port, and if present should indicate
|
|
error in the operation of either the Spanning Tree Protocol
|
|
implementation running on the device or the management entity."
|
|
::= { begemotBridgeStpPortEntry 3 }
|
|
|
|
begemotBridgeStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative Spanning Tree Protocol state of the
|
|
port - value of enabled(1) indicates that the port is
|
|
participating in the Spanning Tree Protocol operation."
|
|
::= { begemotBridgeStpPortEntry 4 }
|
|
|
|
begemotBridgeStpPortPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of the path through this port, when the port
|
|
is the Root Port, to the total cost of the path to the root
|
|
bridge for this bridge."
|
|
::= { begemotBridgeStpPortEntry 5 }
|
|
|
|
begemotBridgeStpPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the bridge recorded as the
|
|
root in the Root Identifier parameter of Configuration BPDUs
|
|
transmitted by the Designated Bridge for the LAN to which
|
|
the port is attached."
|
|
::= { begemotBridgeStpPortEntry 6 }
|
|
|
|
begemotBridgeStpPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For a Designated port, the path cost (equal to the Root
|
|
Path Cost of the bridge) offered to the LAN to which the
|
|
port is attached otherwise the cost of the path to the Root
|
|
offered by the Designated Port on the LAN to which this
|
|
Port is attached."
|
|
::= { begemotBridgeStpPortEntry 7 }
|
|
|
|
begemotBridgeStpPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the bridge to which the
|
|
port belongs, in the case when the port is a designated
|
|
port, otherwise the bridge believed to be the Designated
|
|
Bridge for the LAN to which this port is attached."
|
|
::= { begemotBridgeStpPortEntry 8 }
|
|
|
|
begemotBridgeStpPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX BridgePortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the Bridge port, on the Designated
|
|
Bridge, through which the Designated Bridge transmits the
|
|
Configuration Message information stored by this port."
|
|
::= { begemotBridgeStpPortEntry 9 }
|
|
|
|
begemotBridgeStpPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { begemotBridgeStpPortEntry 10 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the Bridge STP extended ports table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeStpExtPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeStpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains port-specific Rapid Spanning Tree
|
|
information for the bridge interface members."
|
|
::= { begemotBridgeStp 3 }
|
|
|
|
begemotBridgeStpExtPortEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeStpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Rapid Spanning Tree information maintained by
|
|
each bridge interface member."
|
|
AUGMENTS { begemotBridgeStpPortEntry }
|
|
::= { begemotBridgeStpExtPortTable 1 }
|
|
|
|
BegemotBridgeStpExtPortEntry ::= SEQUENCE {
|
|
begemotBridgeStpPortProtocolMigration TruthValue,
|
|
begemotBridgeStpPortAdminEdgePort TruthValue,
|
|
begemotBridgeStpPortOperEdgePort TruthValue,
|
|
begemotBridgeStpPortAdminPointToPoint INTEGER,
|
|
begemotBridgeStpPortOperPointToPoint TruthValue,
|
|
begemotBridgeStpPortAdminPathCost Integer32
|
|
}
|
|
|
|
begemotBridgeStpPortProtocolMigration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When operating in RSTP (version 2) mode, writing true(1)
|
|
to this object forces this port to transmit RSTP BPDUs.
|
|
Any other operation on this object has no effect and
|
|
it always returns false(2) when read."
|
|
::= { begemotBridgeStpExtPortEntry 1 }
|
|
|
|
begemotBridgeStpPortAdminEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of the Edge Port parameter. A
|
|
value of true(1) indicates that this port should be
|
|
assumed as an edge-port, and a value of false(2) indicates
|
|
that this port should be assumed as a non-edge-port.
|
|
Setting this object will also cause the corresponding
|
|
instance of begemotBridgeStpPortOperEdgePort to change to
|
|
the same value. Note that even when this object's value
|
|
is true, the value of the corresponding instance of
|
|
begemotBridgeStpPortOperEdgePort can be false if a BPDU
|
|
has been received.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { begemotBridgeStpExtPortEntry 2 }
|
|
|
|
begemotBridgeStpPortOperEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational value of the Edge Port parameter. The
|
|
object is initialized to the value of the corresponding
|
|
instance of begemotBridgeStpPortAdminEdgePort. When the
|
|
corresponding instance of begemotBridgeStpPortAdminEdgePort
|
|
is set, this object will be changed as well. This object
|
|
will also be changed to false on reception of a BPDU."
|
|
::= { begemotBridgeStpExtPortEntry 3 }
|
|
|
|
begemotBridgeStpPortAdminPointToPoint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forceTrue(0),
|
|
forceFalse(1),
|
|
auto(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative point-to-point status of the LAN segment
|
|
attached to this port, using the enumeration values of the
|
|
IEEE 802.1w clause. A value of forceTrue(0) indicates
|
|
that this port should always be treated as if it is
|
|
connected to a point-to-point link. A value of
|
|
forceFalse(1) indicates that this port should be treated as
|
|
having a shared media connection. A value of auto(2)
|
|
indicates that this port is considered to have a
|
|
point-to-point link if it is an Aggregator and all of its
|
|
members are aggregatable, or if the MAC entity
|
|
is configured for full duplex operation, either through
|
|
auto-negotiation or by management means. Manipulating this
|
|
object changes the underlying adminPortToPortMAC.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { begemotBridgeStpExtPortEntry 4 }
|
|
|
|
begemotBridgeStpPortOperPointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational point-to-point status of the LAN segment
|
|
attached to this port. It indicates whether a port is
|
|
considered to have a point-to-point connection.
|
|
If adminPointToPointMAC is set to auto(2), then the value
|
|
of operPointToPointMAC is determined in accordance with the
|
|
specific procedures defined for the MAC entity concerned,
|
|
as defined in IEEE 802.1w, clause 6.5. The value is
|
|
determined dynamically; that is, it is re-evaluated whenever
|
|
the value of adminPointToPointMAC changes, and whenever
|
|
the specific procedures defined for the MAC entity evaluates
|
|
a change in its point-to-point status."
|
|
::= { begemotBridgeStpExtPortEntry 5 }
|
|
|
|
begemotBridgeStpPortAdminPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively assigned value for the contribution
|
|
of this port to the path cost of paths toward the spanning
|
|
tree root.
|
|
|
|
Writing a value of '0' assigns the automatically calculated
|
|
default Path Cost value to the port. If the default Path
|
|
Cost is being used, this object returns '0' when read.
|
|
|
|
This complements the object begemotBridgeStpPortPathCost or
|
|
begemotBridgeStpPortPathCost32, which returns the operational
|
|
value of the path cost.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { begemotBridgeStpExtPortEntry 6 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the Bridge interface Transparent bridging table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeTpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeTpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information regarding transparent
|
|
bridging for each bridge interface on the managed device."
|
|
::= { begemotBridgeTp 1 }
|
|
|
|
begemotBridgeTpEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeTpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information regarding transparent bridging
|
|
on a bridge interface."
|
|
AUGMENTS { begemotBridgeBaseEntry }
|
|
::= { begemotBridgeTpTable 1 }
|
|
|
|
BegemotBridgeTpEntry ::= SEQUENCE {
|
|
begemotBridgeTpLearnedEntryDiscards Counter32,
|
|
begemotBridgeTpAgingTime Integer32,
|
|
begemotBridgeTpMaxAddresses Integer32
|
|
}
|
|
|
|
begemotBridgeTpLearnedEntryDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Forwarding Database entries that would
|
|
have been learnt, but have been discarded due to Forwarding
|
|
Address Table having reached its maximum entries limit."
|
|
::= { begemotBridgeTpEntry 1 }
|
|
|
|
begemotBridgeTpAgingTime OBJECT-TYPE
|
|
SYNTAX Integer32 (10..1000000)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period in seconds before aging out
|
|
dynamically learnt forwarding entries."
|
|
::= { begemotBridgeTpEntry 2 }
|
|
|
|
begemotBridgeTpMaxAddresses OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries that this bridge can
|
|
learn in its Forwarding Address Table and use for
|
|
making forwarding decisions."
|
|
::= { begemotBridgeTpEntry 3 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- The Forwarding Database for Transparent Bridging interfaces
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about unicast entries
|
|
for which the bridge interfaces have forwarding and/or
|
|
filtering information. This information is used by the
|
|
bridge interfaces to make forwarding decisions."
|
|
::= { begemotBridgeTp 2 }
|
|
|
|
begemotBridgeTpFdbEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a specific unicast MAC address
|
|
for which the bridge interface has some forwarding
|
|
and/or filtering information."
|
|
INDEX { begemotBridgeBaseName, begemotBridgeTpFdbAddress }
|
|
::= { begemotBridgeTpFdbTable 1 }
|
|
|
|
BegemotBridgeTpFdbEntry ::= SEQUENCE {
|
|
begemotBridgeTpFdbAddress MacAddress,
|
|
begemotBridgeTpFdbPort Integer32,
|
|
begemotBridgeTpFdbStatus INTEGER
|
|
}
|
|
|
|
begemotBridgeTpFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has which the
|
|
bridge interface has some forwarding and/or filtering
|
|
information."
|
|
::= { begemotBridgeTpFdbEntry 1 }
|
|
|
|
begemotBridgeTpFdbPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the bridge port on which a frame having
|
|
a source address equal to the value of the corresponding
|
|
instance of begemotBridgeTpFdbAddress has been seen."
|
|
::= { begemotBridgeTpFdbEntry 2 }
|
|
|
|
begemotBridgeTpFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. The meanings of the
|
|
values are:
|
|
other(1) - none of the following.
|
|
invalid(2) - this entry is no longer valid (e.g.,
|
|
it was learned but has since aged out), but has
|
|
not yet been flushed from the table.
|
|
learned(3) - the value of the corresponding instance
|
|
of begemotBridgeTpFdbPort was learned, and is being
|
|
used.
|
|
self(4) - the value of the corresponding instance of
|
|
begemotBridgeTpFdbAddress represents one of the
|
|
bridge's addresses. The corresponding instance of
|
|
begemotBridgeTpFdbPort indicates which of the bridge's
|
|
ports has this address.
|
|
mgmt(5) - the value of the corresponding instance of
|
|
begemotBridgeTpFdbAddress has been added to the
|
|
bridge's Forwarding Database by some management
|
|
means."
|
|
::= { begemotBridgeTpFdbEntry 3 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Ports table for Transparent Bridging interfaces
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeTpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BegemotBridgeTpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every bridge port,
|
|
member of a bridge interface, associated with the transparent
|
|
bridging function of the bridge."
|
|
::= { begemotBridgeTp 3 }
|
|
|
|
begemotBridgeTpPortEntry OBJECT-TYPE
|
|
SYNTAX BegemotBridgeTpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information about every bridge port, member of a
|
|
bridge interface, associated with the bridge's transparent
|
|
bridging function."
|
|
INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
|
|
::= { begemotBridgeTpPortTable 1 }
|
|
|
|
BegemotBridgeTpPortEntry ::= SEQUENCE {
|
|
begemotBridgeTpPort Integer32,
|
|
begemotBridgeTpPortMaxInfo Integer32,
|
|
begemotBridgeTpPortInFrames Counter32,
|
|
begemotBridgeTpPortOutFrames Counter32,
|
|
begemotBridgeTpPortInDiscards Counter32
|
|
}
|
|
|
|
begemotBridgeTpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system interface index of the port for which this entry
|
|
contains Transparent bridging management information."
|
|
::= { begemotBridgeTpPortEntry 1 }
|
|
|
|
begemotBridgeTpPortMaxInfo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size of the INFO (non-MAC) field that this port
|
|
will receive or transmit."
|
|
::= { begemotBridgeTpPortEntry 2 }
|
|
|
|
begemotBridgeTpPortInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames that have been received by this
|
|
port from its segment. Note that a frame received on the
|
|
interface corresponding to this port is only counted by
|
|
this object if and only if it is for a protocol being
|
|
processed by the local bridging function, including
|
|
bridge management frames."
|
|
::= { begemotBridgeTpPortEntry 3 }
|
|
|
|
begemotBridgeTpPortOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames that have been transmitted by this
|
|
port to its segment. Note that a frame transmitted on
|
|
the interface corresponding to this port is only counted
|
|
by this object if and only if it is for a protocol being
|
|
processed by the local bridging function, including
|
|
bridge management frames."
|
|
::= { begemotBridgeTpPortEntry 4 }
|
|
|
|
begemotBridgeTpPortInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of received valid frames that were discarded
|
|
(i.e., filtered) by the Forwarding Process."
|
|
::= { begemotBridgeTpPortEntry 5 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the begemotBridgePf objects
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgePfilStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether packet filtering by some firewall
|
|
package is enabled on the bridge interface."
|
|
::= { begemotBridgePf 1 }
|
|
|
|
begemotBridgePfilMembers OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of true(1) indicates that packet filtering is
|
|
enabled on both incoming and outgoing bridge member
|
|
interfaces."
|
|
::= { begemotBridgePf 2 }
|
|
|
|
begemotBridgePfilIpOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value controls the handling of non-IP packets which
|
|
are not passed on for further processing to a firewall
|
|
package. A value of false(0) indicates that all non-IP
|
|
Ethernet frames are passed unconditionally."
|
|
::= { begemotBridgePf 3 }
|
|
|
|
begemotBridgeLayer2PfStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates whether layer2 filtering by a
|
|
firewall package is enabled for bridge interfaces."
|
|
::= { begemotBridgePf 4 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the begemotBridgeConfigObjects objects
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeDefaultBridgeIf OBJECT-TYPE
|
|
|
|
SYNTAX BridgeIfNameOrEmpty
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the bridge interface that will be managed
|
|
via objects in IETF BRIDGE-MIB (RFC4188). If the
|
|
object's value is set to an empty string, bridge interfaces
|
|
will only be managed via objects in this MIB module."
|
|
DEFVAL { "bridge0" }
|
|
::= { begemotBridgeConfigObjects 1 }
|
|
|
|
begemotBridgeDataUpdate OBJECT-TYPE
|
|
|
|
SYNTAX Timeout (1..300)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age in seconds of the cached data."
|
|
DEFVAL { 10 }
|
|
::= { begemotBridgeConfigObjects 2 }
|
|
|
|
begemotBridgeDataPoll OBJECT-TYPE
|
|
|
|
SYNTAX Timeout (1..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The polling rate of data when the module is idle."
|
|
DEFVAL { 300 }
|
|
::= { begemotBridgeConfigObjects 3 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Notifications for the Spanning Tree Protocol
|
|
-- ---------------------------------------------------------- --
|
|
|
|
begemotBridgeNewRoot NOTIFICATION-TYPE
|
|
OBJECTS { begemotBridgeBaseName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begemotBridgeNewRoot trap indicates that one of the
|
|
bridge interfaces on the sending agent's device has
|
|
become the new root of the spanning tree topology it is
|
|
participating in."
|
|
::= { begemotBridgeNotifications 1 }
|
|
|
|
begemotBridgeTopologyChange NOTIFICATION-TYPE
|
|
OBJECTS { begemotBridgeBaseName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A begemotBridgeTopologyChange trap is send when a member
|
|
port on one of the bridge interfaces, monitored by the agent,
|
|
transitions from the Learning state to the Forwarding state,
|
|
or from the Forwarding state to the Blocking state. The trap
|
|
is not sent if a begemotBridgeNewRoot trap is sent for the
|
|
same transition."
|
|
::= { begemotBridgeNotifications 2 }
|
|
|
|
END
|